63Set Mode: DISPLAY Menu Operations1 Setting What to Display Using the Smart Navigation FunctionSet what to display on the smart navigation screen.1. Press and hold the [DISP] key, and then touch [DISPLAY].2. Touch [1 TARGET LOCATION].3. Rotate the DIAL knob to select what is displayed on the screen.COMPASS Displays the compass.NUMERIC Displays the latitude and longitude.Remark The default setting: COMPASS2 Setting the Compass DisplaySet the compass display.1. Press and hold the [DISP] key, and then touch [DISPLAY].2. Touch [2 COMPASS].3. Rotate the DIAL knob to select the desired setting.HEADING UP The heading direction is indicated at the top of the compass.NORTH UP The north direction is indicated at the top of the compass.Remark The default setting: HEADING UP3 Setting the Search Channels for the BAND SCOPE FunctionSet the number of channels to be displayed for the band scope when the BAND SCOPEfunction is used.1. Press and hold the [DISP] key, and then touch [DISPLAY].2. Touch [3 BAND SCOPE].3. Rotate the DIAL knob to select the number of channels to search for.19ch / 39ch / 79chRemark The default setting: 39ch4 Changing the Lighting ConditionChange the LCD and key lighting condition.1. Press and hold the [DISP] key, and then touch [DISPLAY].2. Touch [4 LAMP].3. Rotate the DIAL knob to select [KEY], then press the [DISP] key.4. Rotate the DIAL knob to select the lighting condition.2 SEC (KEY) to180 SEC (KEY)When the DIAL is rotated or a key is pressed, the LCD and keylights remain illuminated for the set time.CONTINUOUS The LCD and key lights remain illuminated.OFF The LCD and keys do not light up.Remark The default setting: 30 SEC (KEY)5. Press the [DISP] key.6. Rotate the DIAL knob to select [SAVE], then press the [DISP] key.
