767. Rotate the DIAL knob to select the desired setting referring to the table below.ALL CH Scans all memory channels (1 to 900) starting with the currently speci-fied memory channel. When “Selected memory channel” is selected, allspecified memory channels are scanned.BAND Scans only the memory channels to which the frequencies are regis-tered, within the same frequency band *1as the currently specified mem-ory channel.When the memory channels are registered as the specified memorychannels, scans only the specified memory channels to which the fre-quencies are registered, within the same frequency band. *1*1: For the relationship between frequency bands and receive frequencies, see “Se-lecting a Frequency Band” on page 24.8. Press the [BACK] key.9. Rotate the DIAL knob to select [BANK LINK], then press the [DISP] key.10. Rotate the DIAL knob to select the desired setting.ON During memory bank link scanning, memory channels registered in twoor more previously specified banks can be scanned.OFF Only the memory channels assigned to the recalled memory bank arescanned.Remark The default setting: ON6 Setting the Priority Memory Channel transmit operationDetermines the operation of the PTT switch when pressed during the Dual Receive.1. Press and hold the [DISP] key, and then touch [SCAN].2. Touch [6 PRIORITY REVERT].3. Rotate the DIAL knob to select the desired setting.OFF When a signal is received on Priority Memory Channel, duel receivepauses, press the PTT switch to deactivate the Dual Receive operationand transmit on the Priority Memory Channel.(The Dual Receive does not resume.)ON Press the PTT switch to transmit on the Priority Memory Channel.Release the PTT switch to receive the Priority Memory Channel forabout five seconds, then Dual Receive operation continues.Remark The default setting: OFFSet Mode: GM Menu OperationsFor details on how to set each item, refer to “FT3DR/DE GM Function Instruction Manu-al” which is available on Yaesu website.Set Mode: WIRES-X Menu OperationsFor details on how to set each item, refer to “FT3DR/DE WIRES-X Instruction Manual”which is available on Yaesu website.
