52Taking Picture (Snapshot Function)Pictures can be taken by connecting the optional camera-equipped speaker microphone(MH-85A11U).Captured image data can be saved onto a microSD memory card inserted in the trans-ceiver.The saved data can be displayed on the screen and transmitted to other transceivers*as well.In addition, the most recently captured image data can be transmitted to other trans-ceivers* by pressing (Send Image Button) on the camera-mounted speaker micro-phone.* Refer to the Yaesu website or catalog for the compatible transceiver models.Shutter ButtonPress to take a picture.ConnectorSend Image ButtonSends the most recentlytaken image data.PTT SwitchPress to enable transmission,and release to return toreceive mode.SpeakerOutputs sound.LensAim this part toward the object to photograph.Do not touch the lens with fingers or other objects.MicrophoneSpeak into this partwith a normal voice.ClipSecurely clip themicrophone to belt orother objects.Connect to the DATAterminal of the transceiver.Make sure to insert theconnector in the rightdirectionwhen connecting the speaker microphoneto the transceiver.Connecting it forcibly to the transceivermay cause damage.• Make sure to keep at least 50 cm distance between the lens and the object. If the object istoo close, the picture will be out of focus, resulting in a blurred picture.• You can set the size (resolution) and image quality (compression ratio) of the image to beshot by the following operations.Press and hold the [DISP] key → [OPTION] → [1 USB CAMERA].• If your station and the remote station are both in digital mode, you can transfer the imagedata most recently taken by pressing .• Set the digital mode in advance to transfer images to other radios.• Do not directly photograph objects with strong light, such as the sun or other bright objects.Doing so can cause malfunction.• If the lens or the microphone gets dirty, use a dry, soft cloth to wipe off the contaminants.
