88Restoring to Defaults (Reset)CautionWhen the All Reset function is performed, all data registered in the memory will be deleted. Be sure tonote the settings on paper or back up the data on a microSD memory card. For details on how to savebackup onto a microSD memory card refer to “Set Mode: SD CARD Menu Operations” on page 84.All ResetTo restore all transceiver settings and memory content to the factory defaults.1. Turn the transceiver OFF.2. Press and hold the [BACK] key, the [DISP] key and the [BAND] key and turn thetransceiver ON simultaneously.The beep sounds and the confirmation screen is displayed.3. Touch [OK].• The beep will sound, and the transceiver will reset all factory defaults.• After resetting all defaults, the call sign input message appears on the LCD. Setthe call sign.• To cancel the resetting, touch [CANCEL].Set Mode ResetReset only the Set mode parameters, and restore them to the default settings.1. Turn the transceiver OFF.2. Press and hold the [BACK] key and the [DISP] key and turn the transceiver ONsimultaneously.The beep sounds and the confirmation screen is displayed.3. Touch [OK].z The beep will sound, and the transceiver will reset all Set mode settings to defaults.z To cancel the resetting, touch [CANCEL].z To reset all the following items, perform All Reset (see above).[DISPLAY]7 OPENING MESSAGE[TX/RX]1-1 ANTENNA ATT1-2 FM BANDWIDTH1-3 RX MODE2-4 DIGITAL VW[MEMORY]1 BANK LINK2 BANK NAME3 MEMORY NAME5 MEMORY SKIP[SIGNALING]1 BELL2 DCS CODE3 DCS INVERSION5 DTMF MEMORY6 PAGER7 PR FREQUENCY9 SQL S-METER11 SQL TYPE12 TONE SQL FREQ[SCAN]5 SCAN WIDTH[GM]1 DP-ID LIST[WIRES-X]1 RPT/WIRES FREQ2 SEARCH SETUP3 EDIT CATEGORY TAG4 REMOVE ROOM/NODE[CONFIG]6 CLOCK TYPE12 PASSWORD15 RPT SHIFT16 RPT SHIFT FREQ18 STEP[APRS]6 APRS MSG GROUP7 APRS MSG TEXT13 BEACON INFO15 BEACON STATUS TEXT17 COM PORT SETTING18 DIGI PATH19 GPS SETUP23 CALLSIGN (APRS)24 MY POSITION25 MY SYMBOL[OPTION]2 Bluetooth3 DEVICE LIST25 Bluetooth Save[CALLSIGN]CALLSIGN
