50Recording the receive audio1. Touch [F MW], and then touch [REC].If [REC] is not displayed, touch [BACK ←] to display[REC] and then touch it.• The display will indicate “RECSTART” and recordingwill begin.• During recording, “ ” icon is displayed at the top ofthe screen.• With the factory default settings, the “A-band” re-ceived audio is recorded.• Recording will be paused about 3 seconds after thesquelch of the band that is recording is closed. Re-cording will resume when a signal is received.• The band or bands to be recorded, and whether ornot to include the transmit audio in the recording maybe selected in the set mode.Recording is stopped when the transceiver is turned OFF.2. Touch [F MW], and then touch [REC STOP].The recording will be stop.Setting the Recording functionThe band or bands to be recorded, and whether or not to include the transmit audio inthe recording may be selected:1. Press and hold the [DISP] key, and then touch [TX/RX].2. Touch [3 AUDIO], and then touch [5 RECORDING].3. Press the [DISP] key, and then rotate the DIAL knob toselect the band to record.A: Record the A-band received audioB: Record the B-band received audioA+B: Record both A-band and B-band received audio5 RECORDINGBAND: AMIC : OFF
