8010 Setting the Operation of the MONI/T-CALL KeySet how the transceiver functions when the MONI/T-CALL key is pressed.1. Press and hold the [DISP] key, and then touch [CONFIG].2. Touch [10 MONI/T-CALL].3. Rotate the DIAL knob to select the desired setting.MONI Monitors frequencies.T-CALL Functions as the tone call.Remark The default setting: NONI (USA version), T-CALL (European/Asian version)11 Turning the Transceiver ON/OFF at the Specified TimeTimer FunctionYou can turn the transceiver to ON or OFF at the specified time. Before using this func-tion, adjust the clock referring to “19 Setting Clock Time” on page 82.1. Press and hold the [DISP] key, and then touch [CONFIG].2. Rotate the DIAL, then touch [11 TIMER].3. Rotate the DIAL knob to select the desired option.POWER ON Turns the transceiver ON at the specified time.POWER OFF Turns the transceiver OFF at the specified time.4. Press the [DISP] key.5. Rotate the DIAL knob to set the hour, then press the [DISP] key.6. Rotate the DIAL knob to set the minute, then press the [DISP] key.7. Touch [TIMER ON] or [TIMER OFF] to set the timer function to ON or OFF.8. Touch [TIMER OFF] to deactivate the timer function.Remark The default setting: £ (TIMER OFF)12 Password FunctionA 4-digit password may be entered to prevent a third party from using the transceiverwithout permission. Once a password is set, the transceiver cannot be used unless thevalid password is entered.1. Press and hold the [DISP] key, and then touch [CONFIG].2. Rotate the DIAL, then touch [12 PASSWORD].3. Rotate the DIAL knob to select [ON].ON Set the password.OFF Does not set the password.Remark The default setting: OFF4. Press the [DISP] key.5. Use the numeric keypad to input the desired 4 letters using 0 to 9, A to D, * or #.6. Press the [DISP] key.7. The registered 4 letters appear.• To deactivate the password function, select [OFF] in step 3, then press PTT switch.• When the on-timer function is activated, the password function is disabled.
