46Connect with another Bluetooth®headset1. Press and hold the [DISP] key, and then touch [OP-TION].2. Touch [2 Bluetooth], and then rotate the DIAL knobto select [ON].3. If already connected to a Bluetooth headset, touch[DISCON] to disconnect.2 BluetoothONSSM-BT10Connected4. Touch [SEARCH].Search Bluetooth devices to display them in the de-vice list in the following order:(1) Already registered, searched and foundBluetooth devices: white letters(2) Searched and found newBluetooth devices: white letters(3) Already registered but not found by searchBluetooth devices: gray lettersTouch [STOP] to cancel the search.5. Rotate the DIAL knob to select the desired Bluetoothdevice.6. Touch [CONNECT] to connect.SSM-BT10Remove a registered (paired) Bluetooth ®device from the listSelect the Bluetooth device to be deleted in step 5 above, and touch [DEL].Display device listIf [3 Bluetooth device list] is touched in step 2 above, Bluetooth devices that have al-ready been registered are displayed in the device list without performing a search. Con-nect by turning the DIAL knob and selecting the Bluetooth headset to connect and thentouch [CONNECT].Bluetooth®battery save functionTurning on the Bluetooth Battery Saver feature extends the battery life of the standbyBluetooth headset.When the Bluetooth battery save function is “ON”, hands-free operation using VOX (VoiceOperated Transmit) function is not possible. Press the SSM-BT10 [Multifunction] key toswitch between transmit and receive. For details, refer to “Send by pressing the button onthe Bluetooth headset (when the VOX function is off)” (page 47).
