53Taking pictures1. Connect the camera-equipped speaker microphone (MH-85A11U) to the DATAterminal of the transceiver.• When connecting or disconnecting the MH-85A11U, turn off the FT3DR/DE.• When receiving an AM radio broadcast signal with the camera microphone connected,noise may occur, but this is not a malfunction.2. Point the camera lens at the object to be photographed and press the shutter buttonon the microphone.• The captured image appears on the LCD.• Touch the image, to temporarily turn OFF the display of buttons and view the en-tire photo. Touch the image again to display the buttons.3. To save the image onto the microSD memory card, touch [SAVE].Press the [BACK] key or touch [DEL] to return the display to the previous operatingscreen without saving the image.4. To transmit the saved image to other transceivers, press the (Send Image But-ton) on the MH-85A11U or touch [SEND].5. Press the [BACK] key or touch [OK] to return to the normal operation.Viewing the Saved Image1. Touch [F MW], and then touch [LOG].If [LOG] is not displayed, touch [BACK ←] to display [LOG] and then touch it.2. Touch [PICT].Displays the saved image data list.3. Touch the image to be displayed.• Displays the selected image.• To transmit the image to other transceivers, touch [SEND] or [FWD]. When thetransfer is complete, the screen in step 3 will return.4. Press the [BACK] key several times to return to the previous operating screen.
