Yaesu FT3DR Operating Manual

Also see for FT3DE: Operating manual Manual Instruction manual Instruction manual Instruction manual

Contents

59Set mode no. / item Description Selectable options( Options in bold are the default settings)GM* For details of the functions, refer to the GM Function Instruction Manual.1 DP-ID LIST Displays the DP-ID list screen. –2 RADIO ID CHECK Display the transceiver specificnumber (ID). (Uneditable) –WIRES-X* For details of the functions, refer to the WIRES-X Instruction Manual.1 RPT/WIRES FREQ Set the frequency to be used forRepeater/WIRES.MANUAL / PRESET2 SEARCH SETUP Set the WIRES ROOM selectionmethod.HISTORY / ACTIVITY3 EDIT CATEGORY TAG Edit category tags. C1 to C54 REMOVE ROOM/NODE Delete registered Category ROOMs. C1 to C55 DG-ID Set the DG-ID number for WIRES-X. 01 to 99 / AUTOCONFIG1 APO Set the length of time until thetransceiver turns OFF automatically.OFF / 30 min to 12 hour2 BCLO Turn on/off the busy channel lockoutfunction.ON / OFF3 BEEP Set the beep emitting function, andset whether or not to emit the beepsound when a band edge/CH1 isencountered.SELECT: KEY&SCAN / KEY / OFFEDGE: ON / OFF4 BEEP LEVEL Beep volume setting. HIGH / LOW5 BUSY LED Turn the BUSY indicator ON or OFF. A BAND: ON / OFFB BAND: ON / OFFRADIO: ON / OFF6 CLOCK TYPE Set the clock shift function. A / B7 GPS LOG Set the GPS log recording timeinterval.OFF / 1sec / 2sec / 5sec / 10sec / 30sec /60sec8 HOME VFO Enable/disable VFO transmission inHome Channel.ENABLE / DISABLE9 LOCK Configure the lock mode setting. KEY&DIAL / PTT / KEY&PTT / DIAL&PTT /ALL / KEY / DIAL10 MONI/T-CALL Select the function of the MONI/T-CALL switch.MONI / T-CALL** European / Asian version11 TIMER Switch the timer between ON andOFF.POWER ON: 00:00 - 23:59POWER OFF: 00:00 - 23:5912 PASSWORD Input the password. OFF / ON : - - - -13 PTT DELAY Set the PTT delay time. OFF / 20ms / 50ms / 100ms / 200ms14 RPT ARS Turn the ARS function ON or OFF. ON / OFF15 RPT SHIFT Set the repeater shift direction. SIMPLEX / -RPT / +RPT16 RPT SHIFT FREQ Set the repeater shift width. 0.000MHz to 150.000MHz17 SAVE RX Set the receive save time. OFF / 0.05sec (1:1) to 20.0sec (1:400)18 STEP Set the channel step. AUTO / 5.0KHz / 6.25KHz / (8.33KHz) /(9.0KHz) / 10.0KHz / 12.5KHz / 15.0KHz /20.0KHz / 25.0KHz / 50.0KHz / 100KHz19 DATE & TIME ADJ Set the built-in clock. -20 TOT Set the timeout timer. OFF / 30sec - 3MIN - 10MIN21 VFO MODE Select the frequency selection rangein the VFO mode.ALL / BAND22 DIAL KNOB CHANGE Swap the Dial and VOL knobfunctions.Upper knob: DIAL knobLower knob: VOL knob