49• The band scope channel interval is the same as the VFO frequency step.• In the frequency range of 108 MHz to 580 MHz, “FULL” is displayed and scanning continuescontinuously. The received audio can be heard during the scan.• •In frequency ranges other than 108 MHz to 580 MHz, “1Time” is displayed, and scanning isstopped after one scan. Received audio is not heard during scanning. If [SEARCH] is touched orthe DIAL knob is turned to change the frequency, one scan will be performed automatically.For additional details on the CAM (Club Channel Activity Monitor), refer to the AdvancedManual which may be downloaded from the Yaesu website.CAM (Club Channel Activity Monitor) functionUp to 10 groups with 5 channels each, of frequently used memory channels may beregistered, and then while receiving the current frequency, the status (signal strength) ofthe selected group of memory channels may be displayed. It is easy to identify on whichchannel the communication was made.When a memory channel on the graph is touched, it will become the center operatingfrequency, so communication with friends may begin immediately.Using the Voice RecordingWith the voice recording function, the received audio of the other station, and/or thetransmit audio of this unit is recorded on the microSD memory card. The recorded filecan be played back with FT3DR/DE or the microSD memory card can be taken out andused on a PC.Once recording is started, recording continues until recording is stopped, or the capacityof the microSD card is full.About the file• The audio file is saved in the “VOICE” folder on the microSD card.• The file format is a Wave sound format file (extension: wav).• The file name is “YYMMDDmmhhss.wav” (YY: year, MM: month, DD: day, hh: hour,mm: minute, ss: second) depending on the date and time when the recording started.• When using the microSD memory card for the first time, please refer to “Formatting a microSDMemory Card” on page 21 for formatting.• Since the date and time information is used for file names and file timestamps, when usingthe voice recording function, it is recommended to set the date and time of the transceiver inadvance by referring to “19 Setting Clock Time” on page 82 It is recommended.
