57Tables of Set Mode OperationsSet mode no. / item Description Selectable options( Options in bold are the default settings)DISPLAY1 TARGET LOCATION Set what to display using the smartnavigation function.COMPASS / NUMERIC2 COMPASS Set the compass display of the smartnavigation function.HEADING UP / NORTH UP3 BAND SCOPE Set the number of search channelsfor the band scope function.19ch / 39ch / 79ch4 LAMP Set the duration time of the backlightand keys to be lit.KEY: OFF / 2 to 180 / CONTINUOUSKEY 30 secSAVE: ON / OFF5 LANGUAGE Switch between Japanese/English forthe menus and Set mode, etc.ENGLISH / JAPANESE6 LCD DIMMER Set the brightness level of the LCDbacklight and numeric keypad light.LEVEL1 to LEVEL67 OPENING MESSAGE Set the opening message type. OFF / DC / MESSAGE8 SENSOR INFO Display the voltage. DC9 SOFTWARE VERSION Display the software version. Main / Sub / DSPTX/RX1 MODE1 ANTENNA ATT Switch the attenuator between ON orOFF.ON / OFF2 FM BANDWIDTH Set the FM transmission modulationlevel.WIDE / NARROW3 RX MODE Select the receive mode. AUTO / FM / AM2 DIGITAL1 DIGITAL POPUP Set the POP UP time. OFF / BAND2s / BAND4s / BAND6s /BAND8s / BAND10s / BAND20s /BAND30s / BAND60s / BAND CONTINUE2 LOCATION SERVICE Set whether or not to display yourcurrent location in digital mode.ON / OFF3 STANDBY BEEP Switch the standby beep functionbetween ON or OFF.ON / OFF4 DIGITAL VW Turn the VW mode selection ON orOFF.OFF / ON3 AUDIO1 MIC GAIN Adjust the microphone gain level. LEVEL1 to LEVEL9 LEVEL52 MUTE Set the muting level on the nonoperating band side when a signal isreceived on the operating band side.OFF / MUTE 30% / MUTE 50% /MUTE 100%3 RX AF DUAL Set the resume time of radio receptionin the AF Dual mode.Transmit and receive 1 second to10 seconds, Fixed, or transmission 1 secondto 10 seconds.Transmit and receive 2 seconds4 VOX VOX function setting. VOX: OFF / LOW / HIGHDELAY: 0.5 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0 (sec)5 RECORDING Voice record function setting. BAND: A / B / A+BMIC: ON / OFFMEMORY1 BANK LINK Set the memory bank link. BANK1 to BANK24BANK LINK ON / OFF2 BANK NAME Assign a name to each memory bank. BANK1 to BANK243 MEMORY NAME Input the memory channel tag. Up to 16 letters
