34Clearing Memories1. Touch and hold [F MW].2. Rotate the DIAL knob to select the memory channelfrom which the data is to be cleared.3. Touch [ ], then touch [M.DEL].Confirmation screen “DELETE?” is displayed.4. Touch [OK] twice to clear the memory channel.• Data on memory channel One, and the Home channel may not be cleared.• The erased memory channel can be recovered by the following procedure.Restore erased memory1. Press the [V/M] key to enter the memory mode.2. Touch and hold [F MW].3. Rotate the DIAL knob to select the channel to berestored.4. Touch [ ].5. Touch [M.REV].Confirmation screen “DELETE?” is displayed.6. Touch [OK] to restore the memory channel.Recalling the Home Channels1. Touch [F MW], and then touch [HOME].If [HOME] is not displayed, touch [BACK ←] to display[HOME] and then touch it.z “HOM” and the home channel frequency of the cur-rently selected band appears on the LCD.2. Press the [V/M] key, or touch [F MW] and then touch[HOME] to return to the previous frequency.• While recalling the home channel, rotate the DIAL knob to transfer the home channelfrequency to the operating band VFO.• The home channel frequency can be set not to be transferred in the Set Mode [CONFIG]→ [8 HOME VFO] (page 79).Changing the Home Channel Frequency1. Set the frequency and the operating mode to be stored as a home channel.2. Touch and hold [F MW].3. Touch [ ].4. Touch [H.WRITE].Confirmation screen “OVERWRITE?” is displayed.5. Touch [OK] twice.The beep sounds and the home channel frequency is changed.