70Set Mode: MEMORY Menu Operations1 Setting Memory Bank LinkYou can link multiple registered memory banks so that you can recall frequently usedmemory banks immediately.1. Press and hold the [DISP] key, and then touch [MEMORY].2. Touch [1 BANK LINK].3. Rotate the DIAL knob to select the memory bank you want to link, then press the[DISP] key.The checkbox is checked.4. Repeat step 3 to link the memory banks one by one from BANK 1 to BANK 24.2 Assigning Name to Memory BankBy selecting [2 BANK NAME], you can assign a name to each memory bank using up to16 characters.For additional details, refer to the Advanced Manual which may be downloaded from theYaesu website.3 Assigning Name to Memory ChannelBy selecting [3 MEMORY NAME], you can assign a name such as a call sign and broad-cast station name to each memory channel and home channel.For additional details, refer to the Advanced Manual which may be downloaded from theYaesu website.4 Memory Channel Protect FunctionA memory channel may be protected so that a new frequency or memory channel tagname cannot be registered to it.1. Press and hold the [DISP] key, and then touch [MEMORY].2. Touch [4 MEMORY PROTECT].3. Rotate the DIAL knob to select the desired setting.OFF Allows registering to registering to memory channels.ON Prohibits registering to memory channels.Remark The default setting: OFF5 Setting Memory Skip FunctionBy selecting [5 MEMORY SKIP], you can set the scan method for scanning memorychannels.For additional details, refer to the Advanced Manual which may be downloaded from theYaesu website.
