Yamaha FZ09E Service Manual

EA$1AC 1501REMOVING THE ENGINE1. Loosen:• Eng in e mounting adjust bolt (front)TIP ~~~~~~~~~~~~~~~Loosen the engine mounting adjust bolt with thepivot shaft wrench "1".Pivot shaft wrench90890-01485Frame mount insert wrenchYM-014852. Loosen:• Eng in e mounting adjust bolts (rear)TIP ~~~~~~~~~~~~~~~Loosen the engine mounting adjust bolts withthe pivot shaft wrench "1" and pivot shaft wrenchadapter ''2".Pivot shaft wrench90890-01518Frame spanner socketYM-01518Pivot shaft wrench adapter90890-0147615-7ENGINE REMOVAL1 2INSTALLING THE ENGINE1. Insta ll :• Engine mounting adjust bolt (front) "1"(temporarily tighten)• Engine mounting adjust bolts (rear) "2"(temporarily tighten)2. Insta ll :• Engine3 . Insta ll :• Engine mountin g bolt (rear upper side) "3"• Engine mountin g bolt ( re ar lower side) "4"4. Insta ll :• Adapter bolt (left) "5"(temporari ly tighten)5. Insta ll :• Engine mounting bolt (left front upper side)"6"• Engine mounting bolt (left front lower s id e) "7"• Engine mounting bolt (right front lower side)''8"Tempora ril y tighten the engine mountin g bolts6. Tighten:• Engine mounting adjust bolt (front) "1"TIP ~~~~~~~~~~~~~~-• Tighten the engine mounting adjust bolt tospecification with the pivot shaft wrench.• Make sure that the flange on the enginemounting adjust bolt contacts the eng in e.Engine mounting adjust bolt(front)7 Nm (0.7 m·kgf, 5.1 ft·lbf)Pivot shaft wrench90890-01485Frame mount Insert wrenchYM-014857. Tighten:• Engine mounting adjust bolts (rear) "2"