GENERATOR AND STARTER CLUTCH3. Apply:• Sealant(onto the stator coil assembly lead gro mm et)4. Install:Yamaha bond No.1215(Three bond No.1215®)90890-85505• Generator cover gasket l~Mi• Ge nerator cove rGenerat or cover bolt "1"12 Nm (1 .2 m·k,gf, 8.7 ft·lbf)LOCTITE®Generat or cover bolt " 2"12 Nm (1 .2 m·k,gf, 8.7 ft·lbf)TIP ~~~~~~~~~~~~~~Tighten th e generator cover bolts in stages andin a c ri sscross patte rn .5. Connect:• Stator co il coupler• Crankshaft position sensor couplerTI P ~~~~~~~~~~~~~~-To ro ute the stator coil lead, refer to "C ABLEROUTING" on page 2-41.5-34