Yamaha FZ09E Service Manual

b. Keep pressing the timing cha in tensioner rodby hand, remove the hexagon wrench andslowly release the timing chain tensioner rod.c. Make sure that the timing chain tensioner rodcomes out of the timing chain tensioner hous-ing smoothly. If there is rough movement, re-place th e timing chain tensioner.INSTALLING THE CAMSHAFTS1. Remove:• Timing mark accessing bolt " 1"• Crankshaft end cover ''2"-_J2. Align:• Mark "a" on the generator rotor(with the generator rotor cover mark "b")••••••••••••••••••••••••••••••••a. Turn the crankshaft counterclockwise.b. Wh en piston # 1 is at BTDC1 25° on the com-pression stroke, a li gn the BTDC1 25° mark "a"on the gen erator rotor with the generator rotorcover ma rk "b ".CAMSHAFTS&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&3 . Insta ll :• Intake camshaft sprock et "1"• Exhaust camshaft sprocket "2"Camshaft sprocket bolt24 Nm (2.4 m·kg f, 17 ft· lbf)NOTICE ~~~~~~~~~~~~~Be sure to tighten the camshaft sprocketbolts to the specified torque to avoid thepossibility of the bolts coming loose anddamaging the eng in e.TIP ~~~~~~~~~~~~~~~• Insta ll the camshaft pro jecti on "a" at the posi-tion shown in the ill ustration.• Tighten the camshaft sprocket bolt with thecamshaft wrench "3".5-14Camshaft wrench90890-04162YM-04162a3a