Manuals database logo
manualsdatabase
Your AI-powered manual search engine

3Com MSR 30-40 manuals

MSR 30-40 first page preview

MSR 30-40

Brand: 3Com | Category: Network Router
Table of contents
  1. Table Of Contents
  2. Safety Information Sicherheitsinformation
  3. Important Safety Information Wichtige Sicherheitsinformation
  4. Electrostatic Discharge
  5. Regulatory Compliance Standards Regulatorische Befolgungsanforderungen
  6. European Directive Compliance Europäische richtungweisende Befolgung
  7. USA Regulatory Compliance
MSR 30-40 first page preview

MSR 30-40

Brand: 3Com | Category: Network Router
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. Table Of Contents
  11. Table Of Contents
  12. Table Of Contents
  13. Table Of Contents
  14. Table Of Contents
  15. Table Of Contents
  16. Table Of Contents
  17. Table Of Contents
  18. Table Of Contents
  19. Table Of Contents
  20. Table Of Contents
  21. Table Of Contents
  22. Table Of Contents
  23. Table Of Contents
  24. Table Of Contents
  25. Table Of Contents
  26. Table Of Contents
  27. Table Of Contents
  28. Table Of Contents
  29. Table Of Contents
  30. Table Of Contents
  31. Table Of Contents
  32. Table Of Contents
  33. Table Of Contents
  34. Table Of Contents
  35. Table Of Contents
  36. Table Of Contents
  37. Table Of Contents
  38. Table Of Contents
  39. Table Of Contents
  40. Table Of Contents
  41. Table Of Contents
  42. Table Of Contents
  43. Table Of Contents
  44. Table Of Contents
  45. Table Of Contents
  46. Table Of Contents
  47. Table Of Contents
  48. Table Of Contents
  49. Table Of Contents
  50. Table Of Contents
  51. Table Of Contents
  52. Table Of Contents
  53. Table Of Contents
  54. Table Of Contents
  55. Table Of Contents
  56. Table Of Contents
  57. Table Of Contents
  58. Table Of Contents
  59. Table Of Contents
  60. Table Of Contents
  61. Table Of Contents
  62. Table Of Contents
  63. Table Of Contents
  64. Table Of Contents
  65. Table Of Contents
  66. Table Of Contents
  67. Conventions
  68. Related Documentation
  69. ATM and DSL Interface
  70. IMA-E1/T1 Interface Configuration
  71. Configuring an ATM E1/T1 Interface
  72. ATM IMA-E1/T1 Interface Configuration Example
  73. Troubleshooting ATM IMA-E1/T1 Interfaces
  74. ATM E3/T3 Interface Configuration
  75. Overview
  76. Configuring an ADSL Interface
  77. G.SHDSL Interface Configuration
  78. Displaying and Maintaining ATM and DSL Interfaces
  79. Troubleshooting DSL Interfaces
  80. SONET/SDH
  81. Displaying and Maintaining POS Interfaces
  82. POS Interface Configuration Example
  83. Connecting Routers Through POS Interfaces Across Frame Relay
  84. Troubleshooting POS Interfaces
  85. General Ethernet Interface Configuration
  86. Configuring Flow Control on an Ethernet Interface
  87. Configuring Loopback Test on a Layer 2 Ethernet Interface
  88. Configuring the Working Mode of an Ethernet Interface
  89. Configuring the Storm Suppression Ratio for an Ethernet Interface
  90. Configuring the Interval for Collecting Ethernet Interface Statistics
  91. Configuring the Cable Type for an Ethernet Interface
  92. Testing the Cable on an Ethernet Interface
  93. Configuring the Suppression Time of Link-Layer-State Changes on an Ethernet Interface
  94. Asynchronous Serial Interface
  95. Configuring an Asynchronous Serial Interface
  96. AUX Interface
  97. Synchronous Serial Interface
  98. AM Interface
  99. Configuring an AM Interface
  100. Configuring ISDN BRI Interface
  101. Configuring CE1/PRI Interface (in E1 Mode)
  102. Configuring CE1/PRI Interface (in PRI Mode)
  103. Configuring Other CE1/PRI Interface Parameters
  104. Configuring Error Packets Diffusion Restraint
  105. Configuring CT1/PRI Interface in CT1 Mode
  106. Configuring Other CT1/PRI Interface Parameters
  107. Starting/Stopping a BERT Test on CT1/PRI Interface
  108. Displaying and Maintaining CT1/PRI Interfaces
  109. E1-F Interface
  110. Configuring Other E1-F Interface Parameters
  111. T1-F Interface
  112. Starting/Stopping a BERT Test on T1-F Interface
  113. Displaying and Maintaining T1-F Interfaces
  114. Configuring a CE3 Interface operating in CE3 Mode
  115. Displaying and Maintaining CE3 Interfaces
  116. CT3 Interface
  117. Configuring a CT3 Interface (in T3 Mode)
  118. Configuring Other CT3 Interface Parameters
  119. Displaying and Maintaining CT3 Interfaces
  120. Introduction to ATM Technology
  121. Overview of IPoA, IPoEoA, PPPoA and PPPoEoA Applications
  122. IPoA
  123. Configuring ATM
  124. Sub-interface
  125. Assigning a Transmission Priority to an ATM PVC
  126. Configuring PVC Service Map
  127. Configuring VP Policing
  128. Configuring IPoEoA
  129. Configuring PPPoEoA
  130. Displaying and Maintaining ATM
  131. ATM Configuration Examples
  132. network diagram
  133. IPoEoA Configuration Example
  134. PPPoA Configuration Example
  135. ATM PVC Transmit Priority Configuration Example
  136. Troubleshooting ATM
  137. Introduction to DCC
  138. DCC Features
  139. DCC Configuration
  140. Configuring C-DCC
  141. Configuring RS-DCC
  142. Configuring MP for DCC
  143. Configuring PPP Callback
  144. Configuring ISDN Caller Identification Callback
  145. Configuring Advanced DCC Functions
  146. Configuring DCC Timers and Buffer Queue Length
  147. Configuring Traffic Statistics Interval
  148. C-DCC Application
  149. RS-DCC Application
  150. DCC Application on ISDN
  151. Router-to-Router Callback with DCC (PPP Approach)
  152. Router-to-Router Callback with DCC (ISDN Approach)
  153. Router-to-PC Callback with DCC
  154. NT Server-to-Router Callback with DCC
  155. Circular Dial String Backup and Internet Access with DCC
  156. Troubleshooting
  157. DLSw Overview
  158. Differences between DLSw v1.0 and DLSw v2.0
  159. Related Specifications
  160. Creating DLSw Peers
  161. Mapping a Bridge Set to DLSw
  162. Configuring LLC2 Parameters
  163. Enabling the Multicast Function of DLSw v2.0
  164. Configuring DLSw in an SDLC Environment
  165. Configuring an SDLC Interface
  166. Configuring an SDLC Address for a Secondary Station
  167. Configuring an SDLC Peer
  168. Configuring an SDLC Virtual MAC Address
  169. Configuring Optional SDLC Parameters
  170. Configuring Local Reachable MAC or SAP Addresses
  171. Displaying and Debugging DLSw
  172. Configuring SDLC-to-SDLC DLSw
  173. Configuring DLSw for SDLC-LAN Remote Media Translation
  174. Configuring DLSw with VLAN Support
  175. DLSw v2.0 Configuration Example
  176. Troubleshooting DLSw
  177. Unable to Establish a DLSw Circuit
  178. Frame Relay Terminologies
  179. Frame Relay Protocol Parameters
  180. Frame Relay Address Mapping
  181. Frame Relay Configuration Task List
  182. Configuring Frame Relay Address Mapping
  183. Configuring Frame Relay Switching
  184. Configuring Frame Relay Subinterface
  185. Configuring Frame Relay over IP Network
  186. Configuring Annex G
  187. Configuring DCE Side Frame Relay
  188. Configuring Frame Relay Local Virtual Circuit
  189. Frame Relay Configuration Example
  190. Interconnecting LANs through Dedicated Line
  191. Interconnecting LANs through an Annex G DLCI
  192. Troubleshooting Frame Relay
  193. Frame Relay Compression
  194. Configuring FRF.9 Compression
  195. Displaying and Maintaining Frame Relay Compression
  197. Configuring Multilink Frame Relay
  198. Displaying and Maintaining Multilink Frame Relay
  199. MFR Switched Connection Configuration Example
  200. Configuring PPPoFR
  201. PPPoFR Configuration Example
  202. Configuring MPoFR
  203. MPoFR Configuration Example
  204. Introduction to GVRP
  205. GVRP
  206. Configuring GVRP
  207. Displaying and Maintaining GVRP
  208. GVRP Configuration Example II
  209. GVRP Configuration Example III
  210. Introduction to HDLC
  211. Configuring HDLC
  212. Introduction to X.25 and LAPB Protocols
  213. Configuring LAPB
  214. Configuring X.25
  215. Configuring X.25 Interface Supplementary Parameters
  216. Configuring X.25 Datagram Transmission
  217. Configuring Additional Parameters for X.25 Datagram Transmission
  218. Configuring X.25 Load Sharing
  219. Configuring X.25 Closed User Group
  220. X.25 PAD Remote Access Service
  221. Configuring X.25 PAD
  222. Configuring X.25 over TCP (XOT)
  223. Configuration Procedure
  224. Configuring X.25 over FR
  225. Configuring X2T
  227. Displaying and Maintaining LAPB and X.25
  228. X.25 Configuration Examples
  229. Direct Connection of Two routers through Serial Interfaces (Two Mappings)
  230. Connecting the Router to X.25 Public Packet Network
  231. Configuring VC Range
  232. X.25 Subinterface Configuration Example
  233. SVC Application of XOT
  234. PVC Application of XOT
  235. SVC Application of X.25 over FR
  236. PVC Application of X.25 over FR
  237. X.25 Load Sharing Application
  238. Implementing X.25 Load Sharing Function for IP Datagram Transmission
  239. TCP/IP Header Compression Protocol Application
  240. X.25 PAD Configuration Example
  241. X2T Configuration Example
  242. X2T PVC Configuration Example
  243. Failed to Ping the Other Side with X.25 on Both Sides Being Up
  244. Continuous Resets and Clears of the VC Established
  245. Link Aggregation
  246. Consistency Considerations for Ports in an Aggregation
  247. Static LACP Link aggregation
  248. Load Sharing in a Link Aggregation Group
  249. Configuring Link Aggregation
  250. Configuring a Static LACP Link Aggregation Group
  251. Entering Aggregation Port Group View
  252. Modem Configuration
  253. Configuring the Modem Answer Mode
  255. Port Mirroring Overview
  256. Configuring Local Port Mirroring
  257. Displaying and Maintaining Port Mirroring
  258. Introduction to PPP and MP
  259. Configuring PPP
  260. Configuring the Local Device to Authenticate the Peer Using PAP
  261. Configuring the Local Device to Be Authenticated by the Peer Using PAP
  262. Configuring PPP Negotiation
  263. Configuring PPP Link Quality Control
  264. Configuring MP
  265. Configuring an MP-group
  266. Configuring IPHC
  267. Displaying and Maintaining PPP/MP/PPP Link Efficiency Mechanism
  268. PPP and MP Configuration Example
  269. MP Configuration Example
  270. Three Types of MP Binding Mode
  271. Troubleshooting PPP Configuration
  272. Introduction to PPPoE
  273. Configuring PPPoE Server
  274. Configuring PPPoE Client
  275. Resetting/Deleting a PPPoE Session
  276. Displaying and Maintaining PPPoE
  277. PPPoE Client Configuration Example
  278. pap authentication
  279. Connecting a LAN to the Internet via ADSL Modem
  280. Using ADSL as Backup Line
  281. Bridging Overview
  282. forwarding and filtering
  283. Bridging Configuration Task List
  284. Configuring Bridge Table Entries
  285. Displaying and Maintaining Bridging Configurations
  286. Transparent Bridging over PPP
  287. Transparent Bridging over MP
  288. Transparent Bridging over FR
  289. Transparent Bridging X.25
  290. Inter-VLAN Transparent Bridging
  291. Bridging with FR Sub-Interface Support
  292. Bridge Routing
  293. Introduction to ISDN
  294. Configuring ISDN
  295. Configuring ISDN PRI
  296. Configuring the Negotiation Parameters of ISDN Layer 3 Protocol
  297. Configuring the SPID of the ISDN NI Protocol
  298. Setting the Called Number or Sub-Address to Be Checked During a Digital Incoming Call
  299. Setting the Local Management ISDN B Channel
  300. Configuring the Sliding Window Size on the PRI Interface
  301. Configuring TEI Treatment on the BRI Interface
  302. Specifying an ISDN BRI Interface to be in Permanent Active State on Physical Layer
  303. Displaying and Maintaining ISDN
  304. Connecting Routers through ISDN BRI Lines Running NI
  305. Using ISDN BRI Leased Line to Implement MP Bundling
  306. Configuring ISDN 128K Leased Lines
  307. Interoperating with DMS100 Switches
  309. MSTP Overview
  310. Introduction to MSTP
  311. Protocols and Standards
  312. Configuration Task List
  313. Configuring the Root Bridge
  314. Specifying the Root Bridge or a Secondary Root Bridge
  315. Configuring the Work Mode of MSTP Device
  316. Configuring the Maximum Hops of an MST Region
  317. Configuring the Network Diameter of a Switched Network
  318. Configuring the Timeout Factor
  319. Configuring the Maximum Transmission Rate of Ports
  320. Configuring Ports as Edge Ports
  321. Configuring the Mode a Port Uses to Recognize/Send MSTP Packets
  322. Enabling the Output of Port State Transition Information
  323. Configuring Leaf Nodes
  324. Configuring Port Priority
  325. Enabling Output of Port State Transition Information
  326. Configuring Digest Snooping
  327. Configuration Example
  328. Configuring No Agreement Check
  329. Prerequisites
  330. Configuring Protection Functions
  331. Enabling Loop Guard
  332. Enabling TC-BPDU Attack Guard
  333. MSTP Configuration Example
  334. Introduction to VLAN
  335. VLAN Fundamental
  336. VLAN Classification
  337. Configuring VLAN Interface Basic Attributes
  338. Configuring a Port-Based VLAN
  339. Configuring the Access-Port-Based VLAN
  340. Configuring the Trunk-Port-Based VLAN
  341. Configuring the Hybrid-Port-Based VLAN
  342. VLAN Configuration Examples
  343. Introduction to Voice VLAN
  344. Working Modes of Voice VLAN
  345. Security Mode and Normal Mode of Voice VLAN
  346. Configuring the Voice VLAN
  347. Displaying and Maintaining Voice VLAN
  348. Voice VLAN Configuration Examples
  349. A Configuration Examples of Voice VLAN under Manual Mode
  350. Introduction to Port Isolation
  351. Displaying and Maintaining Isolation Groups
  352. Concept
  353. Implementation
  354. Enabling the Dynamic Route Backup Function on a Backup Interface
  355. Example II
  356. Example III
  357. Using One Dynamic Route Group to Monitor Multiple Network Segments
  358. Logical Interface Overview
  359. Configuring a Loopback Interface
  360. Introduction to Sub-interface
  361. Configuring a WAN Sub-interfaces
  362. Ethernet Sub-interface Configuration Example
  363. WAN Sub-interface Configuration Example
  364. Configuring MP-group Interfaces
  365. VT and VA Interface
  366. Displaying and Maintaining VTs and VA Interfaces
  367. Configuring VE
  368. CPOS
  369. SDH Frame Structure
  370. Multiplexing E1/T1 Channels to Form STM-1
  371. Overhead Byte
  372. Configuring a CPOS Interface
  373. Configuring an E1 Channel
  374. Displaying and Maintaining CPOS Interfaces
  375. ARP Overview
  376. ARP Process
  377. ARP Mapping Table
  378. Configuring ARP
  379. Enabling the ARP Entry Check
  380. Configuring Gratuitous ARP
  381. Configuring ARP Source Suppression
  382. Configuring Authorized ARP
  383. Example for Configuring Authorized ARP on a DHCP Relay Agent
  384. Displaying and Maintaining ARP
  385. Proxy ARP Overview
  386. Displaying and Maintaining Proxy ARP
  387. Local Proxy ARP Configuration Example in Case of Port Isolation
  388. configure the router
  389. Introduction to DHCP
  390. DHCP Address Allocation
  391. IP Address Lease Extension
  392. DHCP Options
  393. Self-Defined Options
  395. Introduction to DHCP Server
  396. IP Address Allocation Sequence
  397. DHCP Server Configuration Task List
  398. Configuring an Address Pool for the DHCP Server
  399. Configuring a Domain Name Suffix for the Client
  400. Configuring WINS Servers and NetBIOS Node Type for the Client
  401. Configuring Gateways for the Client
  402. Configuring the TFTP Server and Bootfile Name for the Client
  403. Configuring the DHCP Server Security Functions
  404. Configuration Prerequisites
  405. Configuring the DHCP Server to Support Authorized ARP
  406. Displaying and Maintaining the DHCP Server
  407. Self-Defined Option Configuration Example
  408. Troubleshooting DHCP Server Configuration
  409. Introduction to DHCP Relay Agent
  410. DHCP Relay Agent Support for Option 82
  411. DHCP Relay Agent Configuration Task List
  412. Correlating a DHCP Server Group with Relay Agent Interfaces
  413. Configuring the DHCP Relay Agent to Send a DHCP-Release Request
  414. Configuring the DHCP Relay Agent to Support Option 82
  415. Displaying and Maintaining the DHCP Relay Agent Configuration
  416. Troubleshooting DHCP Relay Agent Configuration
  417. Introduction to DHCP Client
  418. Displaying and Maintaining the DHCP Client
  419. DHCP Snooping Overview
  420. Configuring DHCP Snooping Basic Functions
  421. Introduction to BOOTP Client
  422. Obtaining an IP Address Dynamically
  423. DNS Overview
  424. DNS Proxy
  425. Configuring Dynamic Domain Name Resolution
  426. DNS Configuration Examples
  427. DNS Proxy Configuration Example
  428. Troubleshooting DNS Configuration
  429. Introduction to IP Accounting
  430. IP Accounting Configuration Example
  431. Network Diagram
  432. Displaying and Maintaining IP Accounting Configuration
  433. IP Addressing Overview
  434. Special Case IP Addresses
  435. IP Unnumbered
  436. IP Addressing Configuration Example
  437. Configuring IP Unnumbered
  438. Displaying and Maintaining IP Addressing
  439. IP Performance Overview
  441. Configuring TCP Attributes
  442. Enabling Protection Against Naptha Attack
  443. Configuring TCP Optional Parameters
  444. Configuring ICMP to Send Error Packets
  445. Displaying and Maintaining IP Performance
  446. Introduction to IP Unicast Policy Routing
  447. Enabling System Policy Routing
  448. Enabling Interface Policy Routing
  449. IP Unicast Policy Routing Configuration Examples
  450. Introduction to UDP Helper
  451. Configuring UDP Helper
  452. UDP Helper Configuration Example
  453. URPF Overview
  454. Configuring URPF
  455. Introduction to Fast Forwarding
  456. Configuring Fast Forwarding
  457. IPv6 Overview
  458. Introduction to IPv6 Address
  459. Introduction to IPv6 Neighbor Discovery Protocol
  460. IPv6 PMTU Discovery
  461. Introduction to IPv6 DNS
  462. Configuring Basic IPv6 Functions
  463. Configuring IPv6 NDP
  464. Configuring the Maximum Number of Neighbors Dynamically Learned
  465. Configuring the Number of Attempts to Send an NS Message for DAD
  466. Configuring PMTU Discovery
  467. Configuring the Aging Time for PMTU
  468. Configuring ICMPv6 Packet Sending
  469. Enable Sending of Multicast Echo Replies
  470. Displaying and Maintaining IPv6 Basics Configuration
  471. IPv6 Configuration Example
  472. Troubleshooting IPv6 Basics Configuration
  473. NAT-PT Overview
  474. NAT-PT Mechanism
  475. NAT-PT Configuration Task List
  476. Enabling NAT-PT
  477. Configuring Mappings for IPv6 Hosts Accessing IPv4 Hosts
  478. Configuring the NAT-PT Session Timeout Time for Different Protocol Packets
  479. Displaying and Maintaining NAT-PT
  480. Configuring Dynamic IPv6-to-IPv4 Mappings
  481. Configuring Static IPv4-to-IPv6 and IPv6-to-IPv4 Mappings
  482. Troubleshooting NAT-PT
  483. Dual Stack Overview
  484. Introduction to Tunneling
  485. IPv6 over IPv4 Tunnel
  486. IPv4 over IPv4 Tunnel
  487. IPv4/IPv6 over IPv6 Tunnel
  488. PE Overview
  489. Tunneling Configuration Task List
  492. Configuring Automatic IPv4-Compatible IPv6 Tunnel
  494. Configuring 6to4 Tunnel
  495. Configuration Example 1
  496. Configuration Example 2
  497. Configuring ISATAP Tunnel
  499. Configuring IPv4 over IPv4 Tunnel
  501. Configuring IPv4 over IPv6 Tunnel
  503. Configuring IPv6 over IPv6 Tunnel
  506. Displaying and Maintaining Tunneling Configuration
  507. Introduction to IPv6 Unicast Policy Routing
  508. Enabling IPv6 System Policy Routing
  509. Enabling IPv6 Interface Policy Routing
  510. Introduction to Terminal Access
  511. Typical Applications of Terminal Access
  512. Terminal Access Feature List
  513. Terminal Access Features
  514. Terminal Access Specifications
  515. TTY Terminal Access Configuration
  516. Configuration Example for TTY Terminal Access
  517. Telnet Terminal Access Configuration
  518. Configuration Example for Telnet Terminal Access
  519. RTC Terminal Access Configuration
  520. Asynchronous RTC Terminal Access Configuration Example
  521. Asynchronous RTC Multi-instance Configuration Example
  522. Displaying and Maintaining Terminal Access Configuration
  523. Installing and Configuring SCO OpenServer Server
  524. Modifying System Configuration File inittab
  525. Installing and Using ttyd Administration Program ttyadm
  526. Installing and Configuring SCO UnixWare Server
  527. Modifying System Configuration File ttydefs
  528. Modifying Route Configuration File
  529. Editing the ttyd Configuration File
  530. Installing and Configuring IBM AIX Server
  531. Running and Terminating ttyd on the Unix Server
  532. Installing and Configuring HP-UX Server
  533. Editing ttyd Configuration File
  534. Installing and Configuring Red Hat Linux Server
  536. Running and Terminating ttyd on Unix Server
  537. Prompts on Terminals
  538. Terminal Access Troubleshooting
  539. IP Routing and Routing Table
  540. Routing Protocol Overview
  541. Routing Protocols and Routing Priority
  542. Load Balancing and Route Backup
  543. Configuring Load Sharing
  544. Displaying and Maintaining a Routing Table
  545. Bandwidth-based Load Sharing Configuration Example
  546. BGP Overview
  547. Formats of BGP Messages
  548. BGP Path Attributes
  549. BGP Route Selection
  550. IBGP and IGP Information Synchronization
  551. Settlements for Problems Caused by Large Scale BGP Networks
  552. MP-BGP
  553. BGP Configuration Task List
  554. Configuring BGP Basic Functions
  555. Controlling Route Distribution and Reception
  556. Advertising a Default Route to a Peer or Peer Group
  557. Configuring BGP Route Reception Policy
  558. Enabling BGP and IGP Route Synchronization
  559. Tuning and Optimizing BGP Networks
  560. Configuring a Large Scale BGP Network
  561. Configuring BGP Community
  562. Configuring a BGP Route Reflector
  563. Displaying and Maintaining BGP Configuration
  564. Resetting BGP Connections
  565. BGP and IGP Interaction Configuration
  566. BGP Load Balancing and MED Attribute Configuration
  567. BGP Community Configuration
  568. BGP Route Reflector Configuration
  569. verify the configuration
  570. BGP Confederation Configuration
  571. BGP Path Selection Configuration
  572. Troubleshooting BGP Configuration
  573. IS-IS Overview
  574. IS-IS Area
  575. IS-IS Network Type
  576. IS-IS PDU Format
  577. IS-IS Features Supported
  579. IS-IS Configuration Task List
  580. Configuring IS-IS Basic Functions
  581. Configuring IS-IS Routing Information Control
  582. Configuring IS-IS Link Cost
  583. Configuring the Maximum Number of Load Balanced Routes
  584. Advertising a Default Route
  585. Configuring IS-IS Route Leaking
  586. Configuring IS-IS Timers
  587. Disabling an Interface from Sending/Receiving IS-IS Hello Packets
  588. Configuring Dynamic Host Name Mapping
  589. Logging the Adjacency Changes
  590. Displaying and Maintaining IS-IS Configuration
  591. IS-IS Configuration Example
  592. DIS Selection Configuration
  593. IS-IS GR Configuration Example
  594. Introduction to OSPF
  595. Basic Concepts
  596. OSPF Area Partition and Route Summarization
  597. Classification of OSPF Networks
  598. OSPF Packet Formats
  599. Related RFCs
  600. Configuring OSPF Basic Functions
  601. Configuring OSPF Area Parameters
  602. Configuring OSPF Network Types
  603. Configuring an NBMA Neighbor
  604. Configuring OSPF Route Summarization
  605. Configuring OSPF Link Cost
  606. Configuring OSPF Priority
  607. Configuring OSPF Network Optimization
  608. Configuring LSA Transmission Delay Time
  609. Configuring SPF Calculation Interval
  610. Disabling Interfaces from Sending OSPF Packets
  611. Configuring OSPF Authentication
  612. Configuring the Maximum Number of External LSAs in LSDB
  613. Enabling the Advertisement and Reception of Opaque LSAs
  614. Configuring the OSPF GR Helper
  615. Displaying and Maintaining OSPF Configuration
  616. OSPF Configuration Examples
  617. Configuring an OSPF Stub Area
  618. Configuring an OSPF NSSA Area
  619. Configuring OSPF DR Election
  620. Troubleshooting OSPF Configuration
  621. RIP Overview
  622. Operation of RIP
  623. RIP Version
  624. TRIP
  625. RIP Features Supported
  626. Configuring RIP Advanced Functions
  627. Configuring RIP-2 Route Summarization
  628. Disabling Host Route Reception
  629. Configuring a Priority for RIP
  630. Configuring RIP Timers
  631. Enabling CheckZero Field Check on RIPv1 Messages
  632. Enabling Source IP Address Check on Incoming RIP Updates
  633. Configuring TRIP
  634. Configuring RIP-to-MIB Binding
  635. Configuring RIP Route Redistribution
  636. Troubleshooting RIP Configuration
  637. Introduction to Routing Policy
  638. Filters
  639. Routing Policy Application
  640. Defining an AS Path ACL
  641. Configuring a Routing Policy
  642. Defining apply Clauses for the Routing Policy
  643. Displaying and Maintaining the Routing Policy
  644. Applying a Routing Policy When Redistributing IPv6 Routes
  645. Troubleshooting Routing Policy Configuration
  646. Introduction
  647. Application Environment of Static Routing
  648. Detecting Reachability of the Static Route's Nexthop
  649. Displaying and Maintaining Static Routes
  650. IPv6 BGP Overview
  651. IPv6 BGP Configuration Task List
  652. Configuring IPv6 BGP Basic Functions
  653. Configuring a Preferred Value for Routes from a Peer/Peer Group
  654. Configuring a Non Direct EBGP Connection to a Peer/Peer Group
  655. Configuring IPv6 BGP Route Redistribution
  656. Configuring Route Distribution Policy
  657. Configuring IPv6 BGP and IGP Route Synchronization
  658. Configuring IPv6 BGP Route Attributes
  659. Configuring the MED Attribute
  660. Configuring IPv6 BGP Timers
  661. Configuring IPv6 BGP Soft Reset
  662. Configuring a Large Scale IPv6 BGP Network
  663. Configuring IPv6 BGP Community
  664. Configuring an IPv6 BGP Route Reflector
  665. Configuring Basic 6PE Capabilities
  666. Configuring Optional 6PE Capabilities
  667. Displaying and Maintaining IPv6 BGP Configuration
  668. Resetting IPv6 BGP Connections
  669. IPv6 BGP Route Reflector Configuration
  670. PE Configuration
  671. Troubleshooting IPv6 BGP Configuration
  672. Introduction to IPv6 IS-IS
  673. Configuring IPv6 IS-IS Routing Information Control
  674. Displaying and Maintaining IPv6 IS-IS
  675. IPv6 IS-IS Configuration Example
  676. Introduction to OSPFv3
  677. OSPFv3 LSA Types
  678. OSPFv3 Features Supported
  679. Configuring OSPFv3 Basic Functions
  680. Configuring OSPFv3 Area Parameters
  681. Configuring OSPFv3 Virtual Links
  682. Configuring Link Costs for OSPFv3 Interfaces
  683. Configuring OSPFv3 Route Redistribution
  684. Configuring the DR Priority for an Interface
  685. Disabling Interfaces from Sending OSPFv3 Packets
  686. Displaying and Maintaining OSPFv3
  687. default route
  688. Configuring OSPFv3 DR Election
  689. Incorrect Routing Information
  690. Introduction to RIPng
  691. RIPng Packet Format
  692. RIPng Packet Processing Procedure
  693. Configuring RIPng Advanced Functions
  694. Configuring RIPng Route Summarization
  695. Configuring the RIPng Priority
  696. Configuring RIPng Timers
  697. Configuring Zero Field Check
  698. RIPng Configuration Example
  699. Introduction to IPv6 Static Routing
  700. Configuring an IPv6 Static Route
  701. Introduction to Multicast
  702. Roles in Multicast
  703. Advantages and Applications of Multicast
  704. Multicast Architecture
  705. Multicast Protocols
  706. Multicast Packet Forwarding Mechanism
  707. Multi-Instance Application in Multicast
  708. Multicast Routing and Forwarding Overview
  709. Multicast static route
  710. Multicast Traceroute
  711. Configuring Multicast Routing and Forwarding
  712. Enabling IP Multicast Routing
  713. Configuring a Multicast Routing Policy
  714. Configuring Multicast Forwarding Table Size
  715. Tracing a Multicast Path
  716. Configuration Examples
  717. Creating an RPF Route
  718. Troubleshooting Multicast Routing and Forwarding
  719. Multicast Data Fails to Reach Receivers
  720. IGMP Overview
  721. Enhancements in IGMPv3
  722. Multi-Instance IGMP
  723. Configuring Basic Functions of IGMP
  724. Configuring IGMP Versions
  725. Configuring a Static Member of a Multicast Group
  726. Adjusting IGMP Performance
  727. Configuring IGMP Query and Response Parameters
  728. Configuring IGMP Fast Leave Processing
  729. Displaying and Maintaining IGMP
  730. Troubleshooting IGMP
  731. Inconsistent Memberships on Routers on the Same Subnet
  732. MSDP Overview
  733. How MSDP Works
  734. Multi-Instance MSDP
  735. Configuring Basic Functions of MSDP
  736. Creating an MSDP Peer Connection
  737. Configuring an MSDP Peer Connection
  738. Configuring MSDP Peer Connection Control
  739. Configuring SA Message Content
  740. Configuring an SA Message Filtering Rule
  741. Configuring SA Message Cache
  742. MSDP Configuration Examples
  743. Anycast RP Configuration Example
  744. Static RPF Peer Configuration Example
  745. Troubleshooting MSDP
  746. Inter-RP Communication Faults in Anycast RP Application
  747. PIM Overview
  748. How PIM-DM Works
  749. Introduction to PIM-SM
  750. How PIM-SM Works
  751. Introduction to BSR Admin-scope Regions in PIM-SM
  752. SSM Model Implementation in PIM
  753. Multi-Instance PIM
  754. Configuring PIM-DM
  755. Enabling State Refresh
  756. Configuring State Refresh Parameters
  757. Configuring PIM-SM
  758. Enabling PIM-SM
  759. Configuring a BSR
  760. Configuring an RP
  761. Configuring PIM-SM Register Messages
  762. Configuring RPT-to-SPT Switchover
  763. Configuring the SSM Group Range
  764. Configuring PIM Common Information
  765. Configuring a PIM Filter
  766. Configuring PIM Common Timers
  767. Configuring Join/Prune Message Limits
  768. PIM Configuration Examples
  769. PIM-SM Configuration Example
  770. PIM-SSM Configuration Example
  771. Troubleshooting PIM Configuration
  772. Multicast Data Abnormally Terminated on an Intermediate Router
  773. RPs Unable to Join SPT in PIM-SM
  774. No Unicast Route Between BSR and C-RPs in PIM-SM
  775. IPv6 Multicast Routing and Forwarding Overview
  777. Configuring IPv6 Multicast Routing and Forwarding
  778. Configuring an IPv6 Multicast Forwarding Range
  779. Displaying and Maintaining IPv6 Multicast Routing and Forwarding
  780. Troubleshooting IPv6 Multicast Routing and Forwarding
  781. MLD Overview
  782. How MLDv2 Works
  783. MLD Message Types
  785. Configuring Basic Functions of MLD
  786. Configuring a Static Member of an IPv6 Multicast Group
  787. Adjusting MLD Performance
  788. Configuring MLD Query and Response Parameters
  789. Configuring MLD Fast Leave Processing
  790. Displaying and Maintaining MLD Configuration
  791. Troubleshooting MLD
  793. IPv6 PIM Overview
  794. How IPv6 PIM-DM Works
  795. Introduction to IPv6 PIM-SM
  796. How IPv6 PIM-SM Works
  797. SSM Model Implementation in IPv6 PIM
  799. Configuring IPv6 PIM-DM
  801. Configuring IPv6 PIM-DM Graft Retry Period
  802. Enabling IPv6 PIM-SM
  805. Configuring IPv6 PIM-SM Register Messages
  807. Configuring IPv6 PIM-SSM
  808. Configuring the IPv6 SSM Group Range
  809. Configuring IPv6 PIM Common Information
  810. Configuring an IPv6 PIM filter
  811. Configuring IPv6 PIM Common Timers
  813. Displaying and Maintaining IPv6 PIM
  814. IPv6 PIM-SM Configuration Example
  815. IPv6 PIM-SSM Configuration Example
  816. Troubleshooting IPv6 PIM Configuration
  817. RPs Unable to Join SPT in IPv6 PIM-SM
  818. No Unicast Route Between BSR and C-RPs in IPv6 PIM-SM Domain
  819. Multicast VPN Overview
  820. Introduction to MD-VPN
  821. How MD-VPN Works
  822. Share-MDT-Based Deliver of Multicast Protocol Packets
  823. Share-MDT-Based Delivery of Multicast Data Packets
  824. MDT Switching
  825. MD-VPN Configuration Task List
  826. Configuring a Share-Group and an MTI Binding
  827. Enabling Switch-Group Reuse Log
  828. MD-VPN Configuration Example
  829. Troubleshooting MD-VPN Configuration
  830. Unable to Build an MVRF
  831. MPLS Overview
  832. Basic Concepts of MPLS
  833. Architecture of MPLS
  834. MPLS and Routing Protocols
  835. MPLS Configuration Basics
  836. TTL Processing in MPLS
  837. Inspecting an MPLS LSP
  838. LDP Overview
  839. LDP Label Distribution
  840. Fundamental Operation of LDP
  841. LDP Loop Detection
  842. Configuring MPLS Basic Capability
  843. Configuring PHP
  844. Configuring a Static LSP
  845. Configuring MPLS LDP
  846. Configuring Local LDP Session Parameters
  847. Configuring the Policy for Triggering LSP Establishment
  848. Configuring Label Advertisement, Distribution and Retention Modes
  849. Enabling MTU Signaling
  850. Configuring LDP GR
  851. Restarting MPLS LDP
  852. Configuring MPLS Fast Forwarding
  853. Setting the Interval for Reporting Statistics
  854. Displaying MPLS Operation
  855. Clearing MPLS Statistics
  856. Configuring LDP to Establish LSPs
  857. Troubleshooting MPLS
  858. MPLS TE Overview
  859. MPLS TE Implementation
  860. CR-LSP
  861. CR-LDP
  862. Traffic Forwarding
  863. Automatic Bandwidth Adjustment
  864. CR-LSP Backup
  865. DiffServ-Aware TE
  866. MPLS TE Configuration Task List
  867. Configuring MPLS TE Basic Capabilities
  868. Creating MPLS TE Tunnel over Static CR-LSP
  869. Configuring MPLS TE Tunnel with Dynamic Signaling Protocol
  871. Configuring RSVP-TE Advanced Features
  872. Tuning CR-LSP Setup
  873. Tuning MPLS TE Tunnel Setup
  874. Configuring Traffic Forwarding
  875. Configuring Traffic Forwarding Tuning Parameters
  876. Configuring Automatic Bandwidth Adjustment
  877. Configuring CR-LSP Backup
  878. Configuring FRR
  879. Displaying and Maintaining MPLS TE
  880. Resetting Automatic Bandwidth Adjustment
  881. MPLS TE Configuration Example
  882. MPLS TE Tunnel Using RSVP-TE Configuration Example
  883. RSVP-TE GR Configuration Example
  884. MPLS TE Using CR-LDP Configuration Example
  885. CR-LSP Backup Configuration Example
  886. FRR Configuration Example
  887. MPLS TE in MPLS L3VPN Configuration Example
  888. Troubleshooting MPLS TE
  889. MPLS L2VPN Overview
  890. CCC MPLS L2VPN
  891. Kompella MPLS L2VPN
  892. Configuring a PE Interface Connecting a CE
  893. Configuring a PE Interface Connecting a CE to Use Ethernet
  894. Configuring CCC MPLS L2VPN
  895. Configuring SVC MPLS L2VPN
  896. Configuring Martini MPLS L2VPN
  897. Configuring Kompella MPLS L2VPN
  898. Displaying and Maintaining MPLS L2VPN
  899. Example for Configuring a Remote CCC Connection
  900. Example for Configuring SVC MPLS L2VPN
  901. Example for Configuring Martini MPLS L2VPN
  902. Example for Configuring Kompella MPLS L2VPN
  903. Example for Configuring a Kompella Local Connection
  904. Troubleshooting MPLS L2VPN
  905. MPLS L3VPN Overview
  906. MPLS L3VPN Concepts
  907. MPLS L3VPN Packet Forwarding
  908. MPLS L3VPN Networking Schemes
  909. MPLS L3VPN Routing Information Advertisement
  910. Carrier's Carrier
  911. Multi-AS VPN
  912. Multi-Role Host
  913. OSPF VPN Extension
  914. BGP AS Number Substitution
  915. Configuring VPN Instances
  916. Configuring Route Related Attributes of a VPN Instance
  917. Configuring a Tunneling Policy of a VPN Instance
  918. Configuring Basic MPLS L3VPN
  919. Configuring Routing Features for BGP VPNv4 Subaddress Family
  920. Configuring Inter-Provider VPN
  921. Configuring Inter-Provider VPN Option C
  922. Configuring Multi-Role Host
  923. Configuring OSPF Sham Link
  924. Advertising Routes of a Loopback Interface
  925. Configuring BGP AS Number Substitution
  926. Displaying and Maintaining MPLS L3VPN
  927. MPLS L3VPN Configuration Example
  928. Example for Configuring MPLS L3VPNs Using a GRE Tunnel
  929. Example for Configuring Inter-Provider VPN Option A
  930. Example for Configuring Inter-Provider VPN Option B
  931. Example for Configuring Inter-Provider VPN Option C
  932. Example for Configuring Carrier's Carrier
  933. Example for Configuring Multi-Role Host
  934. Example for Configuring HoVPN
  935. Example for Configuring OSPF Sham Links
  936. Example for Configuring BGP AS Number Substitution
  937. DVPN Overview
  938. Operation of DVPN
  939. Implementation of DVPN
  940. Supported DVPN Features
  941. DVPN Configuration Task List
  942. Enabling the VAM Server
  943. Configuring a Client Authentication Mode
  944. Configuring the Pre-Shared Key of VAM Server for a VPN Domain
  945. VAM Client Configuration Task List
  946. Specifying the Secondary VAM Server
  947. Enabling the VAM Client
  948. Configuring the DVPN Tunnel Parameters
  949. Configuring a DVPN Route
  950. DVPN Configuration Example for Spoke-Hub Networks
  951. configure ospf
  952. GRE Overview
  953. GRE Applications
  954. Configuring a GRE over IPv4 Tunnel
  955. Configuring a GRE over IPv6 Tunnel
  956. Displaying and Maintaining GRE
  957. GRE over IPv6 Tunnel Configuration Example
  958. Troubleshooting GRE
  959. L2TP Overview
  960. Introduction to L2TP
  961. L2TP Configuration Task List
  962. Configuring the Local AAA Scheme and the Users and Passwords
  963. Configuring Mandatory CHAP Authentication
  964. Specifying to perform LCP Negotiation with Users
  965. Configuring the Local Address and the Address Pool for Allocation
  966. Configuring Local Authentication, Usernames and Passwords
  967. NAS-Initiated VPN
  968. Client-Initiated VPN
  969. L2TP Multi-Domain Application
  970. Troubleshooting L2TP
  971. Traditional Packets Forwarding Application
  972. Congestion: Causes, Impact, and Countermeasures
  973. Impact
  974. Traffic Classification Overview
  975. Traffic Policing and Traffic Shaping
  976. Traffic Policing and Traffic Shaping Configuration
  977. Configuring Traffic Shaping
  978. Configuring Line Rate on Physical Interface
  979. Displaying and Maintaining TP/TS/Rate Limiting
  980. Traffic Policing and Shaping Configuration Example
  981. Configuring QoS Policy
  982. Introduction to QoS Policies
  983. Defining Traffic Behavior
  984. Defining Policy
  985. Displaying and Maintaining QoS Policy
  986. Congestion Management Overview
  987. Comparison of Congestion Management Technologies
  988. Configuring FIFO Queuing
  989. Configuring Priority Queuing
  990. Configuring Custom Queuing
  991. Configuring WFQ
  992. Configuring Class-based Queuing
  993. Configuring the Maximum Available Bandwidth on the Interface
  994. Defining a Class
  996. Applying Policy
  997. CBQ Configuration Example
  998. Displaying and Maintaining CBQ
  999. RTP PQ Configuration Example
  1000. QoS Token Configuration Example
  1001. Priority Mapping Overview
  1002. Configuring Priority Mapping Table
  1004. Configuring Port Priority Trust Mode
  1005. Displaying and Maintaining Priority Mapping
  1006. Priority Mapping Configuration Example
  1007. Network Example 2
  1008. Congestion Avoidance Overview
  1009. Configuring WRED
  1010. Configuring WRED on Interface
  1011. Configuring WRED Through WRED Table
  1012. Displaying and Maintaining WRED
  1013. MPLS QoS Overview
  1014. Configuring MPLS PQ
  1015. Configuring MPLS QoS Policy
  1016. MPLS QoS Configuration Example
  1017. DAR Overview
  1018. TCP Packet
  1019. UDP Packet
  1020. RTP Packet
  1021. Static Protocols
  1022. Configuring DAR
  1023. Configuring Port Number of DAR Application Protocol
  1024. Configuring DAR Packet Statistics Function
  1025. DAR Configuration Examples
  1026. Frame Relay QoS Overview
  1027. Frame Relay QoS Implemented
  1028. Configuring Frame Relay QoS
  1029. Configuring Frame Relay Traffic Shaping
  1030. Configuring Frame Relay Traffic Policing
  1031. Configuring Frame Relay Congestion Management
  1032. Configuring Frame Relay Queuing Management
  1033. Configuring Frame Relay Fragmentation
  1034. Displaying and Maintaining Frame Relay QoS
  1035. Frame Relay QoS Configuration Example
  1036. Frame Relay Fragmentation Configuration Example
  1037. Frame Relay WRED Configuration Example
  1038. x Overview
  1039. Operation of 802.1x
  1040. EAP Encapsulation over RADIUS
  1041. Authentication Process of 802.1x
  1042. x Timers
  1043. Implementation of 802.1x in the Devices
  1044. Guest VLAN
  1045. Configuring 802.1x
  1046. Configuring 802.1x for a Port
  1047. Configuring a Guest VLAN
  1048. x Configuration Example
  1049. Guest VLAN Configuration Example
  1050. AAA/RADIUS/HWTACACS Configuration Overview
  1051. Introduction to ISP Domain
  1052. Introduction to RADIUS
  1053. AAA/RADIUS/HWTACACS Configuration Task List
  1054. Configuring AAA
  1055. Configuring ISP Domain Attributes
  1056. Configuring an AAA Authorization Scheme for an ISP Domain
  1057. Configuring an AAA Accounting Scheme for an ISP Domain
  1058. Configuring Local User Attributes
  1059. Tearing down User Connections Forcibly
  1060. Specifying the RADIUS Authentication/Authorization Servers
  1061. Setting the Shared Key for RADIUS Packets
  1062. Setting the Upper Limit of RADIUS Request Retransmission Attempts
  1063. Configuring Attributes Related to the Data Sent to the RADIUS Server
  1064. Setting Timers Regarding RADIUS Servers
  1065. Configuring RADIUS Accounting-on
  1066. Configuring an IP Address for the Security Policy Server
  1067. Configuring HWTACACS
  1068. Specifying the HWTACACS Accounting Servers
  1069. Setting the Shared Key for HWTACACS Packets
  1070. Setting Timers Regarding HWTACACS Servers
  1071. Displaying and Maintaining RADIUS
  1072. AAA for FTP/Telnet Users by the Device Itself
  1073. Troubleshooting AAA/RADIUS/HWTACACS
  1074. Firewall Overview
  1075. ASPF
  1076. Configuring a Packet Filter Firewall
  1077. Configuring the High and Low Watermarks for Fragment Inspection
  1078. Configuring Ethernet Frame Filtering
  1079. Packet Filter Firewall Configuration Example
  1080. Configuring an ASPF
  1081. Configuring an ASPF Policy
  1082. Enabling the Session Logging Function for ASPF
  1083. ASPF Configuration Example
  1084. MAC Authentication Overview
  1085. Local MAC Authentication
  1087. Displaying and Maintaining MAC Authentication
  1088. RADIUS-Based MAC Authentication Example
  1089. NAT Overview
  1090. NAT Functionalities
  1091. NAT Configuration Task List
  1092. Configuring Address Translation
  1094. Configuring Internal Server
  1095. Enabling NAT Log Function
  1096. Configuring Connection-limit
  1098. Displaying and Maintaining NAT
  1099. NAT Configuration Example
  1100. Exporting NAT Logs to the Information Center
  1101. Exporting NAT logs to Log Server
  1102. Troubleshooting NAT
  1103. Introduction to PKI
  1104. Architecture of PKI
  1105. Applications of PKI
  1106. PKI Configuration Task List
  1107. Configuring a PKI Domain
  1108. Submitting a PKI Certificate Request
  1109. Submitting a Certificate Request in Manual Mode
  1110. Retrieving a Certificate Manually
  1111. Destroying a Local RSA Key Pair
  1112. Deleting a Certificate
  1113. Displaying and Maintaining PKI
  1114. verify your configuration
  1115. Applying RSA Digital Signature in IKE Negotiation
  1116. Configuring a Certificate Attribute-Based Access Control Policy
  1117. Troubleshooting PKI
  1118. Failed to Request a Local Certificate
  1119. Portal Overview
  1120. Portal System Components
  1121. Portal Authentication Mode
  1122. Portal Authentication Process
  1123. Portal Configuration Task List
  1124. Configuring an Authentication-Free Rule
  1125. Configuring an Authentication Subnet
  1126. Configuring the Name of the Resource to be Protected
  1127. Portal Configuration Examples (on Routers)
  1128. Re-DHCP Authentication Configuration Examples
  1129. Portal Layer 3 Portal Authentication Configuration Examples
  1130. Portal+ Direct Authentication Configuration Examples
  1131. Portal + Re-DHCP Authentication Configuration Examples
  1132. Layer 3 Portal + Layer 3 Authentication Configuration Examples
  1133. Troubleshooting Portal
  1134. Introduction to RSH
  1135. RSH Configuration Example
  1136. IPSec Overview
  1137. Basic Concepts of IPSec
  1138. Encryption Card
  1139. Configuring ACLs
  1140. Configuring an IPSec Proposal
  1141. Configuring a Manual IPSec Policy
  1142. Configuring an IKE-Dependent IPSec Policy
  1143. Applying an IPSec Policy Group to an Interface
  1144. Enabling the Encryption Engine
  1145. Configuring the IPSec Session Idle Timeout
  1146. Displaying and Maintaining IPSec
  1147. Example for Establishing SAs in IKE Negotiation Mode
  1148. Example for Employing Encryption Cards for IPSec Services
  1149. IKE Overview
  1150. Operation of IKE
  1151. Function of IKE
  1152. Configuring a Name for the Local Security Gateway
  1153. Configuring an IKE Peer
  1154. Configuring Keepalive Timers
  1155. Disabling Next Payload Field Checking
  1156. IKE Configuration Example
  1157. Example for IKE Aggressive Mode and NAT Traversal
  1158. Example for Configuring IPSec/IKE to Work with ADSL
  1159. Troubleshooting IKE
  1160. Proposal Mismatch
  1161. SSH2.0 Overview
  1162. Asymmetric Key Algorithm
  1163. Configuring the Device as an SSH Server
  1164. Enabling SSH Server
  1165. Configuring RSA and DSA Keys
  1166. Configuring a Client Public Key
  1167. Configuring an SSH User
  1168. Configuring the Device as an SSH Client
  1169. Establishing a Connection Between the SSH Client and the Server
  1170. Displaying and Maintaining the SSH Protocol
  1171. SSH Server Configuration Example
  1172. When Using Publickey Authentication
  1173. SSH Client Configuration Example
  1175. SFTP Overview
  1176. Configuring the SFTP Connection Idle Timeout Period
  1177. Working with the SFTP Directories
  1178. Working with SFTP Files
  1179. Displaying Help Information
  1180. SSL Overview
  1181. SSL Configuration Task List
  1182. Configuring an SSL Client Policy
  1183. Troubleshooting SSL
  1184. Introduction to Graceful Restart
  1185. Graceful Restart communication procedure
  1186. Configuring OSPF Graceful Restart
  1187. Introduction to the Backup Center
  1188. How the Backup Center Works
  1189. Introduction to Backup Center Settings
  1190. Associating an Interface with a Track Object
  1191. Displaying and Maintaining the Backup Center
  1192. Backup Center Configuration Example
  1193. Multi-interface Load Sharing Configuration Example
  1194. Introduction to VRRP
  1195. VRRP Standby Group Overview
  1196. VRRP Timers
  1197. Format of VRRP Packets
  1198. Principles of VRRP
  1199. VRRP Tracking
  1200. Configuring VRRP for IPv4
  1201. Enabling Users to Ping Virtual IP Addresses
  1202. Creating Standby Group and Configuring Virtual IP Address
  1203. Configuring Router Priority, Preemption Mode and Tracking Function
  1204. Configuring VRRP Packet Attributes
  1205. Configuring VRRP for IPv6
  1206. Creating Standby Group and Configuring Virtual IPv6 Address
  1207. Configuring Router Priority, Preemption Mode and Interface Tracking
  1208. Displaying and Maintaining VRRP for IPv6
  1209. VRRP Interface Tracking Configuration Example
  1210. Multiple VRRP Standby Groups Configuration Example
  1211. IPv6-Based VRRP Configuration Example
  1213. Multiple VRRP Standby Group Configuration Example
  1214. Troubleshooting VRRP
  1215. Device Management Overview
  1216. Configuring Device Management
  1217. Specifying a Boot ROM File for the Next Device Boot
  1218. Hot Swapping of a Card
  1219. Configuring Alarm Buzzer
  1220. Displaying and Maintaining Device Management Configuration
  1221. Introduction to NQA
  1222. Basic Concepts of NQA
  1223. NQA Test Operation
  1224. Enabling the NQA Client
  1225. Configuring the DHCP Test
  1226. Configuring the HTTP Test
  1227. Configuring the UDP-jitter Test
  1228. Configuring the SNMP Test
  1229. Configuring the TCP Test
  1230. Configuring the UDP-echo Test
  1231. Configuring the DLSw Test
  1232. Configuring the Collaboration Function
  1233. Configuring Optional Parameters Common to an NQA Test Group
  1234. Scheduling an NQA Test Group
  1235. Displaying and Maintaining NQA
  1236. DHCP Test Configuration Example
  1237. HTTP Test Configuration Example
  1238. UDP-jitter Test Configuration Example
  1239. SNMP Test Configuration Example
  1240. TCP Test Configuration Example
  1241. UDP-echo Test Configuration Example
  1242. DLSw Test Configuration Example
  1243. NetStream Overview
  1244. Introduction to NetStream Aggregation
  1245. NetStream Configuration Task List
  1246. Configuring Attributes of NetStream UDP Packets
  1247. Configuring NetStream Statistics Aging
  1248. NetStream Configuration Example
  1249. Setting to Export Version 5 and Version 8 Packets
  1250. NTP Overview
  1251. How NTP Works
  1252. NTP Message Format
  1253. Operation Modes of NTP
  1254. Multiple Instances of NTP
  1255. Configuring NTP Server/Client Mode
  1256. Configuring NTP Multicast Mode
  1257. Configuring Optional Parameters of NTP
  1258. Configuring NTP Authentication
  1260. Displaying and Maintaining NTP
  1261. Configuring the NTP Symmetric Mode
  1262. Configuring NTP Server/Client Mode with Authentication
  1263. Configuring NTP Broadcast Mode
  1264. Configuring MPLS VPN Time Synchronization in Server/Client Mode
  1265. Configuring MPLS VPN Time Synchronization in Symmetric Peers Mode
  1266. RMON Overview
  1267. RMON Groups
  1268. Configuring RMON
  1269. Displaying and Maintaining RMON
  1270. SNMP Overview
  1271. SNMP Protocol Version
  1272. Trap Configuration
  1273. Displaying and Maintaining SNMP
  1274. Configuration Example for SNMP Logging
  1275. File System Management
  1276. File Operations
  1277. File System Prompt Mode Setting
  1278. Configuration File Management
  1279. Saving the Current Configuration
  1280. Erasing the Startup Configuration File
  1281. Backing up/Restoring the Configuration File for Next Startup
  1282. Displaying and Maintaining Device Configuration
  1283. FTP Overview
  1284. Configuring the FTP Client
  1286. FTP Client Configuration Example
  1287. Configuring the FTP Server
  1288. FTP Server Configuration Example
  1289. Displaying and maintaining FTP
  1290. TFTP Overview
  1291. Configuring the TFTP Client
  1292. Displaying and Maintaining the TFTP Client
  1293. System Maintaining and Debugging Overview
  1294. Introduction to System Debugging
  1295. System Maintaining and Debugging
  1296. System Debugging
  1297. Basic Configurations
  1298. Configuring a Banner
  1299. Configuring CLI Hotkeys
  1300. Configuring User Levels and Command Levels
  1301. Configuring Number of Concurrent Users
  1302. CLI Features
  1303. Display Features
  1304. Edit Features
  1305. Information Center Overview
  1306. System Information Format
  1307. Configuring Information Center
  1308. Setting to Output System Information to a Monitor Terminal
  1309. Setting to Output System Information to a Log Host
  1310. Setting to Output System Information to the Log Buffer
  1311. Setting to Save System Information to a Log File
  1312. Configuring Synchronous Information Output
  1313. Information Center Configuration Example
  1314. Outputting Log Information to a Linux Log Host
  1315. Outputting Log Information to the Console
  1316. User Interface Overview
  1317. Numbering User Interfaces
  1318. Configuring Asynchronous Serial Interface Attributes
  1319. Configuring Modem Attributes
  1320. Configuring the auto-execute Command
  1321. Configuring Access Restriction on VTY User Interface(s)
  1322. Configuring Redirection Function on Asynchronous Serial Interface(s)
  1323. Configuring Authentication Mode at Login
  1324. Defining Shortcut Keys for Starting Terminal Sessions/Aborting Tasks
  1325. Introduction to MAC Address Table
  1326. Configuring MAC Address Table Management
  1327. Group
  1328. Configuring Maximum Number of MAC Addresses an Ethernet Port or Aggregation Port Group Can Learn
  1329. MAC Address Table Management Configuration Example
  1330. Introduction to Automatic Configuration
  1331. PoE Overview
  1332. Protocol Specification
  1333. Configuring the PoE Interface
  1334. Configuring PoE Interfaces Through a PoE Configuration File
  1335. Configuring PoE Power Management
  1336. Configuring PD Power Management
  1337. Configuring the PoE Monitoring Function
  1338. Configuring a PD Disconnection Detection Mode
  1339. Displaying and Maintaining PoE
  1340. Troubleshooting PoE
  1341. OAP Module Overview
  1342. Resetting an OAP Module
  1343. Introduction to ACFP
  1344. ACFP Cooperation
  1345. Using ACFP
  1346. Displaying and Maintaining ACFP
  1348. Introduction to ACSEI
  1349. ACSEI Timers
  1350. Configuring the Clock Synchronization Timer
  1351. Installing ACSEI Client
  1352. Controlling ACSEI Client
  1353. Displaying and Maintaining ACSEI Client
  1354. Track Overview
  1355. Configuring Track-NQA Collaboration
  1356. Configuring Track-Static Routing Collaboration
  1357. Configuring Track-Policy Routing Collaboration
  1358. Configure Track-Backup Center Collaboration
  1359. Track Configuration Example
  1360. IPX Protocol Overview
  1361. IPX NetBIOS
  1362. Protocol and Standards
  1363. Configuring an IPX Static Route
  1364. Configuring IPX RIP Parameters
  1365. Configuring IPX SAP Timers
  1366. Configuring IPX Service Information
  1367. Configuring the IPX Forwarding Feature
  1368. Pinging an IPX Network
  1369. Troubleshooting IPX Configuration
  1370. Introduction to VoIP
  1371. VoIP Features
  1372. Voice Function Configuration
  1373. Voice Subscriber Line
  1374. Voice Protocols
  1375. Dial Plan
  1376. Command View
  1378. Signal Tone
  1379. FXS Voice Subscriber Line
  1380. Busy Tone Detection
  1381. E&M Voice Subscriber Line
  1383. Configuring Call Progress Tones
  1384. Configuring Basic Functions
  1385. Configuring Packet Loss Compensation Mode
  1386. Configuring Busy Tone Detection
  1387. Configuring Other Functions
  1388. Configuring E&M Voice Subscriber Line
  1389. Configuring Start Mode
  1390. Configuring Output Gain of SLIC Chip
  1391. Configuring DTMF Properties
  1392. Configuring Options Related to Dial Plan
  1393. Configuring Echo Adjustment Function
  1394. Configuring Gain Adjustment Function
  1395. Configuring Comfort Noise Function
  1396. Introduction to Voice Entities
  1397. Configuring POTS Entity
  1398. Configuring Local POTS Entity to Play Ringback Tones
  1399. Configuring DTMF Transmission
  1401. Configuring VoIP Entity
  1402. Configuring Fast Connection and Tunneling
  1403. Configuring DTMF Transmission in Fast Connection Mode
  1404. Configuring Voice Performance
  1405. Resetting a Voice Card
  1406. Displaying and Maintaining VoIP Configuration
  1407. VoIP Configuration Example
  1408. FXO Interface
  1409. One-to-One Binding between FXS and FXO
  1410. Fast Connection
  1411. Troubleshooting VoIP Configuration
  1412. Failed to Hang Up
  1413. Dial Plan Overview
  1414. Regular Expression
  1415. Introduction to Number Substitution
  1416. Configuring a Calling Number Permitted to Call In
  1417. Enabling Private Line Auto Ring-Down
  1418. Configuring a Dial Terminator
  1419. Configuring a Number Priority Peer
  1420. Configuring a Maximum-Call-Connection Set
  1421. Configuring Number Substitution
  1422. Configuring Number Substitution for A Voice Entity
  1423. Configuring Number Substitution for A Voice Subscriber Line
  1424. Configuring a Dial Prefix
  1425. Configuring the Match Order for Voice Entity Selection
  1426. Configuring the Maximum-Call-Connection Set
  1427. Introduction to E1 and T1
  1428. E1/T1 Interface
  1429. Features of E1/T1
  1430. E1 and T1 Configuration Task List
  1431. Configuring Basic Parameters for E1 Voice Interfaces
  1432. Configuring the Framing Format and Line Coding Format
  1433. Configuring Basic Parameters for T1 Voice Interface
  1434. Configuring the Voice Subscriber Line for a TS Set
  1435. Configuring the Volume Adjustment Function
  1436. Configuring the Comfortable Noise Function
  1437. Binding Logical Voice Subscriber Line to POTS Entity
  1438. Configuring Basic R2 Signaling Parameters
  1439. Configuring R2 Digital Line Signaling
  1440. Configuring R2 Interregister Signaling
  1441. Configuring DSS1 and Q.SIG Signaling
  1442. Configuring Digital E&M Signaling
  1443. Configuring Receive and Transit Signaling
  1444. Configuring the Time Adjustment Function
  1445. Querying the Trunk Circuits of a Timeslot or a Range of Timeslots
  1446. Displaying and Maintaining E1 and T1 Voice Configuration
  1447. E1 Voice DSS1 Signaling Configuration Example
  1448. Failure of Call Connection from Router to PSTN
  1449. FoIP Overview
  1450. Protocol Criteria for FoIP
  1451. Enabling ECM for Fax
  1452. Configuring Fax Capability Transmission Mode
  1453. Configuring Fax Training Mode
  1454. Configuring a Fax Local Training Threshold
  1455. Configuring Fax Interworking Protocol
  1456. Configuring T.38 Capability Description Compatibility
  1457. Configuring Default Values of Fax Parameters Globally
  1458. Displaying and Maintaining FoIP Configuration
  1460. network layer
  1461. H.323 Architecture
  1462. H.323 Fundamentals
  1463. Call Setup
  1464. Opening/Closing Logical Channel(s)
  1465. Configuring Registration Password
  1466. Configuring Security Calling
  1467. H.323 Gateway Configuration Example
  1469. Introduction to SIP
  1470. Terms
  1471. SIP Messages
  1472. SIP Configuration Task List
  1473. Configuring SIP Authentication Information
  1474. Configuring Registrar Information on SIP UA
  1475. Configuring Fuzzy Telephone Number Registration
  1476. Configuring Out-of-Band SIP DTMF Code Transmission Mode
  1477. Configuring SIP Compatibility
  1478. Displaying and Maintaining SIP UAs
  1479. Failed to Set Up Calls in the Proxy Server Approach to SIP Routing
  1480. Failed to Set Up Point-to-Point Calls
  1482. Call Flow in Dynamic Mode
  1483. Configuration Task Lists
  1485. Enabling VAD
  1486. Configuring Dynamic Mode
  1487. Configuring Nonstandard-Compatible Mode
  1488. Configuring FRF.11 Trunk Mode
  1489. Configuring PSTN-Dialed Number
  1490. Configuring Trunk Timer Length in FRF.11 Trunk Mode
  1491. Nonstandard-Compatible VoFR
  1492. FRF.11 Trunk
  1493. Concurrent Transmission of Voice and Data
  1494. Troubleshooting VoFR
  1495. Fundamentals
  1496. RADIUS Provided by Voice Gateway
  1497. Voice RADIUS Configuration Task List
  1498. Configuring Voice RADIUS
  1499. Enabling Authentication Function for One-Stage Dialing Users
  1500. Configuring Rule for Saving CDRs
  1501. Configuring Access Number
  1502. Enabling Accounting Function for Two-Stage Dialing Users
  1503. Enabling Authorization Function for Two-Stage Dialing Users
  1504. Configuring Method of Collecting Digits of Called Number
  1505. Configuring Number of Redial Attempts
  1506. Enabling Language Selection Function
  1507. Displaying and Maintaining Voice RADIUS
  1508. Troubleshooting Voice RADIUS
  1509. Introduction to Call Services
  1510. Call Transfer
  1511. Call Services Configuration Task List
  1512. Configuring Call Waiting Using Command Lines
  1513. Configuring Call Hold
  1514. Configuring Call Forwarding
  1516. Configuring Call Transfer
  1517. Enabling Hunt Group
  1518. Enabling/Disabling Incoming Call Barring Using Keys
  1519. Enabling/Disabling Outgoing Call Barring Using Keys
  1520. Enabling/Disabling FEATURE Service Setting Using Keys
  1521. Configuring FEATURE Service Using Command Lines
  1522. Call Services Configuration Example
  1524. Hunt Group
MSR 30-40 first page preview

MSR 30-40

Brand: 3Com | Category: Network Router
Table of contents
  1. software version
  2. Table Of Contents
  3. Introduction
  4. Online Resources
  5. Known Issues for 3Com MSR
  6. Network Protocol
  7. Voice and Router Inter-Operability - VCX and NBX issues
  8. BOOT Menu
  9. Boot Menu 5. Modify Bootrom Password
  10. Boot Menu 9: Device Operation
  11. Upgrading Software Using TFTP (option 1)
Related products
MSR 50-40MSR 30-16MSR 30-60MSR 30-20MSR 20-40MSR 30 SeriesMSR 20-203040MSR 50-60DPE 40
3Com categories
Switch
Network Router
Network Hardware
Wireless Access Point
Network Card
Modem
Computer Hardware
Software
Telephone
Gateway
More 3Com categories
Manuals database logo
manualsdatabase
Your AI-powered manual search engine