10.3.5.5 SettingsTable 187:QCBAY Non group settings (basic)Name Values (Range) Unit Step Default DescriptionAllPSTOValid PriorityNo priority- - Priority Priority of originators10.3.6 Local remote LOCREM10.3.6.1 IdentificationFunction description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberLocal remote LOCREM - -10.3.6.2 FunctionalityThe signals from the local HMI or from an external local/remote switch are applied via thefunction blocks LOCREM and LOCREMCTRL to the Bay control QCBAY functionblock. A parameter in function block LOCREM is set to choose if the switch signals arecoming from the local HMI or from an external hardware switch connected via binaryinputs.10.3.6.3 Function blockLOCREMCTRLOFFLOCCTRLREMCTRLLHMICTRLOFFLOCALREMOTEVALIDIEC09000076_1_en.vsdIEC09000076 V1 ENFigure 113: LOCREM function block10.3.6.4 SignalsTable 188:LOCREM Input signalsName Type Default DescriptionCTRLOFF BOOLEAN 0 Disable controlLOCCTRL BOOLEAN 0 Local in controlREMCTRL BOOLEAN 0 Remote in controlLHMICTRL INTEGER 0 LHMI control1MRK 511 287-UUS A Section 10Control257Technical manual
