A 1L A F AV p Z I R I= × × + ×EQUATION1603 V1 EN (Equation 74)Where:IA is according to table 411.The accuracy of the distance-to-fault calculation, using the non-compensated impedancemodel, is influenced by the pre-fault load current. So, this method is only used if the loadcompensated models do not function.12.14.8 Technical dataTable 412:LMBRFLO technical dataFunction Value or range AccuracyReactive and resistive reach (0.001-1500.000) Ω/phase ± 2.0% static accuracy± 2.0% degrees static angularaccuracyConditions:Voltage range: (0.1-1.1) x VnCurrent range: (0.5-30) x InPhase selection According to input signals -Maximum number of faultlocations100 -12.15 Station battery supervision SPVNZBAT12.15.1 IdentificationFunction description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberStation battery supervision function SPVNZBAT U<> -1MRK 511 287-UUS A Section 12Monitoring515Technical manual
