Cabletron Systems 6H128-08 User Manual

Contents

Cabletron Systems 6H128-08 User Manual Manual pdf 112 page image

Chapter 5: Local Management5-666H128-08 and 6H129-08 User’s Guide5.18.3 Setting (Enabling or Disabling) the Port StatusTo set the status of an interface (port), proceed as follows:1. Use the arrow keys to highlight the Status field of the port.2. Use the SPACE bar to toggle to either ENABLED or DISABLED.3. Use the arrow keys to highlight the SAVE command at the bottom ofthe screen.4. Press ENTER. The message “SAVED OK” is displayed.5.19 ETHERNET INTERFACE CONFIGURATIONAccess the Ethernet Interface Configuration screen from the ModuleConfiguration Menu screen by using the arrow keys to highlight theETHERNET INTERFACE CONFIGURATION menu item andpressing ENTER. The Ethernet Interface Configuration screen displays.NOTEDisabling the port status of a backplane connection will blockthe module from passing user traffic to the applicable moduleslot in the 6C105 chassis. SNMP and other management traffic(e.g., ping and Telnet traffic), however, will still pass via thebackplane to the applicable module slot.