6H128-08 and 6H129-08 User’s Guide5-1CHAPTER 5LOCAL MANAGEMENTThis chapter explains how to set up a management terminal to access6H12X-08 Local Management, and how to use the Local Managementscreens and commands. This chapter also provides instructions forattaching an Uninterruptible Power Supply to the 6H12X-08 using theConsole Cable Kit provided with the 6C105 chassis.5.1 OVERVIEWLocal Management for the 6H12X-08 consists of a series of screens,some of which allow the management of the module and the 6C105chassis, and some that report statistics. The management screens allowthe user to do the following tasks:• Manage any interface module in the chassis via a connection to asingle interface module.• Assign IP addresses and subnet masks to the 6H12X-08.• Assign a default gateway.• Control access to the 6C105 chassis and the 6H12X-08 module byestablishing community names.• Download a new image of operating software.• Designate which Network Management Workstations receive SNMPtraps from the 6H12X-08.• Configure and have access to any SNMP MIB objects the modulesupports.• Monitor 6C105 chassis environmental information, which includespower supply redundancy, power supply status, and fan tray status.• View RMON, switch and interface statistics.• Assign ports to operate in Auto-Negotiate (optional FE-100TX only),standard or full duplex mode.• Configure SmartTrunk ports to perform load sharing.
