Interface Statistics Screen6H128-08 and 6H129-08 User’s Guide5-91Link Status (Read-only)This field displays the current link status of the interface. This field willread either “Link” or “No Link”.Duplex Mode (Read-only)This field indicates whether the interface is operating in normal or fullduplex mode. This field will read either “Standard” or “Full Duplex”.Interface [nn] (Command)This command is used to enter an interface number for viewing statistics.For instructions on how to use this command, refer to Section 5.27.1.CLEAR COUNTERS (Command)This command is used to reset all statistic counters to zero. For details onhow to use this field, refer to Section 5.27.2.5.27.1 Displaying Interface StatisticsTo display the statistics for any interface, proceed as follows:1. Use the arrow keys to highlight the Interface [nn] field at the bottomof the screen.2. Press the SPACE bar to increment (or press the DEL [delete] orBACKSPACE key to decrement) the interface number.3. Press ENTER (neither the Interface # field nor the statistics willchange until ENTER is pressed).5.27.2 Using the Clear Counters CommandTo reset all the statistics counters of the selected interface to zero, performthe following steps:1. Use the arrow keys to highlight the CLEAR COUNTERS command.2. Press ENTER, the counters for the selected interface are reset to zero.
