Chapter 5: Local Management5-386H128-08 and 6H129-08 User’s GuideThe following explains each Module Menu screen field as shown inFigure 5-16:MODULE CONFIGURATIONThe Module Configuration screen provides access to the LocalManagement screens that are used to configure the 6H12X-08, and also tothe Module Specific Configuration screen. The Module SpecificConfiguration screen provides access to the screens that allow the user tocheck 6H12X-08 resources and set operating parameters specific to eachport. For details about the Module Configuration Menu screen, refer toSection 5.14. For details about the Module Specific Configuration screen,refer to Section 5.21.MODULE STATISTICSThe Module Statistics screen provides statistics and performanceinformation for the 6H12X-08. For details about this screen, refer toSection 5.25.NETWORK TOOLSThe Network Tools function resides on the 6H12X-08 and consists of aseries of commands that allow the user to access and manage networkdevices. Section 5.29 explains how to use the Network Tools utility.5.14 MODULE CONFIGURATION MENU SCREENThe Module Configuration Menu screen, Figure 5-17, provides access tothe Local Management screens that allow you to configure and monitoroperating parameters, modify SNMP community names, set SNMP traps,configure switch parameters and configure the 6H12X-08 ports.NOTEThe following menu items on the Module Configuration Menuscreen may not display if the operational mode of the modulehas been set to SECURE FAST VLAN:SWITCH CONFIGURATIONSMARTTRUNK CONFIGURATIONRefer to your Release Notes to see if the functionality providedby the above screens is supported in SECURE FAST VLANmode.Section 5.15.9 provides instructions on setting the operationalmode.
