Chapter 5: Local Management5-46H128-08 and 6H129-08 User’s Guide5.3 MANAGEMENT TERMINAL SETUPUse one of the following systems to access Local Management:• An IBM or compatible PC running a VT series emulation softwarepackage• A Digital Equipment Corporation VT100 type terminal• A VT type terminal running emulation programs for the DigitalEquipment Corporation VT100 series• A remote VT100 type terminal via a modem connection• In-band via a Telnet connection5.3.1 Console Cable ConnectionUse the Console Cable Kit provided with the 6C105 chassis to attach themanagement terminal to the COM port as shown in Figure 5-1.Connect an IBM PC or compatible device, running VT terminalemulation, to the 6H12X-08 as follows:1. Connect the RJ45 connector at one end of the cable (supplied in thekit) to the COM port on the 6H12X-08.2. Plug the RJ45 connector at the other end of the cable into theRJ45-to-DB9 adapter (supplied in the kit).3. Connect the RJ45-to-DB9 adapter to the communications port on theterminal/PC.NOTEIf using a DEC VT style terminal, use the DB25 adapter for thisdevice instead of the DB9 adapter.
