Chapter 5: Local Management5-486H128-08 and 6H129-08 User’s Guide5.15.5 Setting the Module DateThe modules are year 2000 compliant, so the module date may be setbeyond the year 1999. To set the module date, perform the followingsteps:1. Use the arrow keys to highlight the Module Date field.2. Enter the date in this format: MM/DD/YYYY3. Press ENTER to set the module date to the date in the input field.4. Use the arrow keys to highlight the SAVE command at the bottom ofthe screen and press ENTER.If the date entered is a valid format, the Event Message Line at the top ofthe screen displays “SAVED OK”. If the entry is not valid, LocalManagement does not alter the current value, but it does refresh theModule Date field with the previous value.5.15.6 Setting the Module TimeTo set the module time, perform the following steps:1. Use the arrow keys to highlight the Module Time field.2. Enter the time in a 24-hour format: HH:MM:SSNOTEIf the 6C105 chassis has been assigned a chassis date, it is notnecessary to assign a module date to the 6H12X-08. Allinstalled modules recognize the chassis date of the 6C105.NOTEIt is not necessary to add separators between month, day, andyear numbers. For example, to set the date to 03/17/1997, type“03171997” in the Module Date field.NOTEIf the 6C105 chassis has been assigned a chassis time, it is notnecessary to assign a module time to the 6H12X-08. Allinstalled modules recognize the chassis time of the 6C105.
