Chapter 5: Local Management5-986H128-08 and 6H129-08 User’s Guide5.29.1 Built-In CommandsThe built-in commands listed in this section activate functions on the LMmanaged device or devices being accessed through Network Tools.arp:Syntax: arp [options]Description: The arp command provides access to the ARP(Address Resolution Protocol) cache, enablingyou to view cache data, delete entries, or add astatic route. Super-User access is required todelete an entry or add a static route.Each ARP cache entry lists the networkinterface that the device is connected to, thedevice’s network address or IP address, thedevice’s physical address or MAC address, andthe media type of connection to the device.Media types are displayed as numbers, whichstand for the following states:1 - Other2 - Invalid entry (cannot ping device, timed out,etc.)3 - Dynamic route entry4 - Static route entry (not subject to change)You can specify the arp command with one of the following options:Options: -a Views cache data-d Deletes an IP address entry. Requiresadditional arguments: [Interface Number][IP address]-s Adds a static entry. Requires additionalarguments: [Interface Number] [IP address][MAC address]-f Flushes the ARP cache
