Port Redirect Function Screen6H128-08 and 6H129-08 User’s Guide5-81Errors (Toggle)Allows the user to configure the source ports to either send errored framesto selected destination ports, or to drop errored frames, and send onlyvalid traffic to the destination ports. The default setting of this field is ON.For information on how to change the default setting, refer toSection 5.23.2.Status (Selectable)Allows you to add or delete the source and destination ports selected inthe Source Port [n] and Destination Port [n] fields.5.23.1 Displaying the Source and Destination EntriesThere can be more than one Port Redirect Function screen depending onthe number of port redirect entries. Each screen displays up to 10 portredirect entries. If there is more than one screen of redirect entries, theNEXT and/or PREVIOUS command is displayed at the bottom of thescreen, allowing the user to navigate to either the next or previous screen.For example, with three screens of entries, the NEXT command isdisplayed at the bottom of the first screen. In the second screen, theNEXT and PREVIOUS commands are displayed. In the last screen, onlythe PREVIOUS command is displayed.To display the next screen, use the arrow keys to highlight NEXT. PressENTER and the next screen of entries is displayed.To display the previous screen, use the arrow keys to highlightPREVIOUS. Press ENTER to view the entries in the previous screen.5.23.2 Changing Source and Destination PortsAdd or delete source port and destination port entries as follows:1. Use the arrow keys to highlight the Source Port field.2. Press the SPACE bar or BACKSPACE one or more times to incrementor decrement the port number displayed in the brackets [n] until theappropriate port number is displayed.3. Use the arrow keys to highlight the Destination Port field.4. Use the SPACE bar or BACKSPACE to step to the appropriate portnumber for the destination port.
