Chapter 5: Local Management5-346H128-08 and 6H129-08 User’s Guide5.11.1 Displaying the Source and Destination EntriesThere can be more than one Port Redirect Function screen depending onthe number of port redirect entries. Each screen displays up to ten portredirect entries. If there is more than one screen of redirect entries, theNEXT and/or PREVIOUS command is displayed at the bottom of thescreen, allowing the user to navigate to the next or previous screen.For example, with three screens of entries, the NEXT command isdisplayed at the bottom of the first screen. In the second screen, theNEXT and PREVIOUS commands are displayed. In the last screen, onlythe PREVIOUS command is displayed.To display the next screen, use the arrow keys to highlight NEXT. PressENTER and the next screen of entries is displayed.To display the previous screen, use the arrow keys to highlightPREVIOUS. Press ENTER to view the entries in the previous screen.5.11.2 Changing Source and Destination PortsAdd or delete source/destination module and port entries as follows:1. Use the arrow keys to highlight the Source Module field.2. Press the SPACE bar or BACKSPACE one or more times to incrementor decrement the module number displayed in the brackets [n] until theappropriate module number is displayed.3. Use the arrow keys to highlight the Source Port field.4. Press the SPACE bar or BACKSPACE one or more times to incrementor decrement the interface number displayed in the brackets [n] untilthe appropriate interface number is displayed.5. Use the arrow keys to highlight the Destination Module field.6. Use the SPACE bar or BACKSPACE to step to the appropriatemodule number for the destination module.7. Use the arrow keys to highlight the Destination Port field.
