Chapter 5: Local Management5-846H128-08 and 6H129-08 User’s Guide5.24.1 Setting the ThresholdTo set the Threshold, proceed as follows:1. Use the arrow keys to highlight the Threshold field for the selectedport.2. Type in the numbers for the desired limit in increments of 10 (forexample, 10, 20, 30, etc.).3. Use the arrow keys to highlight the SAVE command at the bottom ofthe screen.4. Press ENTER. The message “SAVED OK” is displayed.5.24.2 Setting the Reset Peak SwitchTo set the Reset Peak Switch field to YES or NO, proceed as follows:1. Use the arrow keys to highlight the Reset Peak field for the selectedport.2. Press the SPACE bar to select YES or NO.3. Use the arrows keys to highlight the SAVE command at the bottom ofthe screen.4. Press ENTER. The message “SAVED OK” displays, the Time SincePeak counter is reset to zero, and the screen is refreshed.5.25 MODULE STATISTICS MENU SCREENThe Module Statistics Menu screen, Figure 5-31, provides access toscreens that allow the user to obtain switch statistics about frame trafficthrough each interface, to view MIB-II statistics from each interface, andto view RMON Statistics gathered by the RMON agent embedded in the6H12X-08.NOTEThe following menu item on the Module Statistics Menu screenwill not display if the operational mode of the module has beenset to SECURE FAST VLAN:SWITCH STATISTICSSection 5.15.9 provides instructions on setting the operationalmode.
