Chapter 5: Local Management5-406H128-08 and 6H129-08 User’s GuideSNMP TRAPSThe SNMP Traps screen provides display and configuration access to thetable of IP addresses used for trap destinations and associated communitynames. For details, refer to Section 5.17.SWITCH CONFIGURATIONThe Switch Configuration screen provides basic setup options formodifying switch operations in the network. For details, refer toSection 5.18.ETHERNET INTERFACE CONFIGURATIONThe Ethernet Interface Configuration screen indicates the link status,current and desired operational mode, advertised ability, and flow controladmin status for ports 1 through 8 on the 6H12X-08. Refer toSection 5.19 for details.SMARTTRUNK CONFIGURATIONThe SmartTrunk Configuration screen allows the user to logically groupinterfaces together to aggregate high speed uplinks. Refer to theCabletron Systems SmartTrunk User’s Guide for additional information.MODULE SPECIFIC CONFIGURATIONThe Module Specific Configuration menu allows the user to accessscreens to configure ports or check system resources specific to the6H12X-08. For details, refer to Section 5.21.5.15 GENERAL CONFIGURATION SCREENThe General Configuration screen, Figure 5-18, allows the user to set thesystem date and time, IP address and subnet mask, and default gateway,the TFTP Gateway IP address, the screen refresh and lockout times, theOperational Mode, Management Mode, and COM port configuration. TheGeneral Configuration screen also allows the user to clear NVRAM, andset the IP Fragmentation.To access the General Configuration screen from the ModuleConfiguration Menu screen, use the arrow keys to highlight theGENERAL CONFIGURATION menu item and press ENTER. TheGeneral Configuration screen, Figure 5-18, displays.
