6-8 Speed Dialing Chapter 6Using Coded Speed DialingTo use this feature, you must first register a number for coded speed dialing. (1 p. 6-6)Follow this procedure to send documents using coded speed dialing:1 Adjust the document feed lever for thedocument you are loading. (2 p. 4-2)2 Prepare the document and load it, face Ex:down, in the ADF (Automatic DocumentFeeder). (2 p. 4-3) (Currently used memory)• For color sending, press Color/B&W toturn on its light. (1 p. 7-2)• To adjust the resolution and contrast, (Standby to scan)see pp. 7-2, 7-4.3 Press .4 Use the numeric buttons to enter the two-digit Ex:code assigned to the number you wish to fax.• The number registered under that coded speed Ex:dialing code is displayed.• If you enter the wrong code, press Stop. Thenpress Coded Dial and enter the correct code.• If no fax number is assigned to the codedspeed dialing code you enter, the LCDdisplays NO TEL #. If this happens, makesure you entered the correct code and thatthe number you want to dial is registeredunder that code.5 Press to begin scanning for sending,or wait a few seconds for the copier/fax tobegin scanning automatically.• If you prefer the copier/fax never to scan adocument automatically after a few seconds,disable the TIME OUT setting. (1 p. 14-5)nYou can also use coded speed dialing to send a document to more than one destination ata time. (1 Sequential Broadcasting, p. 7-13)StartTEL=03 3758 2111A01ACoded DialDOCUMENT READYMEMORY USED 0%
