8-8 Receiving Faxes Chapter 8Receiving Faxes Automatically: FAX ONLY MODEIf you have a separate telephone line for the copier/fax, set FAX ONLY MODE for thecopier/fax to answer all calls as fax calls.Setting FAX ONLY MODEFollow this procedure to set the receive mode to FAX ONLY MODE:1 Press .2 Press .3 Press .4 Use or to select RX SETTINGS.5 Press .6 Use or to select RX MODE.7 Press . Ex:8 Use or to select FAX ONLY MODE.9 Press .10 Press to return to standby mode. Ex:11 Confirm that FaxOnly is displayed in the LCD. Ex:• If FaxOnly is not displayed, press ReceiveMode to select FAX ONLY MODE. After a fewseconds, the LCD returns to standby mode.The copier/fax assumes all incoming calls are from fax machines sending faxes. Itreceives the documents automatically and disconnects all voice calls.nIn FAX ONLY MODE, you can control whether or not the copier/fax rings when it receivesa fax call (1 INCOMING RING, p. 14-6). Please note that even if you enable this option,the copier/fax will only ring if you have an extension phone connected to it.12/27 FaxOnly12/27 FaxOnlyStopINCOMING RINGSetFAX ONLY MODE0208FAX/TEL AUTO SWSetRX MODE0208ECM RXSetRX SETTINGS0208USER SETTINGSSetDATA REGSTRATION01Data RegistrationFunction
