Use ToWi‑Fi Protected Setup (WPS)Start Push Button MethodStart PIN MethodEstablish a wireless network connection and enable network security.Notes:• Start Push Button Method connects the printer to a wirelessnetwork when buttons on both the printer and the access point(wireless router) are pressed within a given period of time.• Start PIN Method connects the printer to a wireless network whena PIN on the printer is entered into the wireless settings of theaccess point.Enable/Disable WPS Auto‑detectionEnableDisableAutomatically detect the connection method that an access point withWPS uses—Start Push Button Method or Start PIN Method.Note: Disable is the factory default setting.Network ModeBSS TypeInfrastructureAd hocSpecify the network mode.Notes:• Infrastructure is the factory default setting. This lets the printeraccess a network using an access point.• Ad hoc configures a wireless connection directly between theprinter and a computer.Compatibility802.11b/g802.11b/g/nSpecify the wireless standard for the wireless network.Note: The 802.11b/g/n is the factory default setting.Choose Network Select an available network for the printer to use.View Signal Quality View the quality of the wireless connection.View Security Mode View the encryption method for the wireless network.AppleTalk menuNote: This menu appears only in printer models that are connected to an Ethernet network or when an optionalwireless network adapter is installed.To access the menu, navigate to either of the following:• Network/Ports > Standard Network > Standard Network Setup > AppleTalk• Network/Ports > Network [x] > Network [x] Setup > AppleTalkUse ToActivateYesNoEnable or disable AppleTalk support.Note: Yes is the factory default setting.View Name Show the assigned AppleTalk name.Note: The AppleTalk name can be changed only from the Embedded WebServer.Understanding the printer menus 151
