Action Yes NoStep 4a Reinstall the imaging unit.1 Remove the toner cartridge.2 Remove the imaging unit.Warning—Potential Damage: Do not expose the imaging unit todirect light for more than 10 minutes. Extended exposure tolight may cause print quality problems.3 Install the imaging unit, and then the cartridge.b Resend the print job.Is the page or image clipped?Contact technicalsupport.The problem is solved.Prints on color transparencies appear dark when projectedNote: This problem occurs when projecting transparencies with reflective overhead projectors. To obtain the highestprojected color quality, transmissive overhead projectors are recommended.Action Yes NoStep 1From the printer control panel, make sure the paper type setting is set toTransparency.Is the paper type setting correct?Go to step 2. Set the paper type toTransparency.Step 2Reduce the toner darkness, and then resend the print job.Does the print on the color transparency look lighter?The problem is solved. Go to step 3.Step 3Make sure you are using a recommended type of color transparency, andthen resend the print job.Does the print on the color transparency look lighter?The problem is solved. Contact technicalsupport.Shadow images appear on printsA B C DA B C DA B C DA B C DLeading edgeTrailing edgeTroubleshooting 280
