• All selectable alerts can be set for nearly low, low, and very low supply conditions. Not all selectable alerts canbe set for the end‑of‑life supply condition. E‑mail selectable alert is available for all supply conditions.• The percentage of estimated remaining supply that prompts the alert can be set on some supplies for somesupply conditions.1 Open a Web browser, and then type the printer IP address in the address field.Notes:• View the printer IP address on the printer home screen. The IP address appears as four sets of numbersseparated by periods, such as 123.123.123.123.• If you are using a proxy server, then temporarily disable it to load the Web page correctly.2 Click Settings > Print Settings > Supply Notifications.3 From the drop‑down menu for each supply, select one of the following notification options:Notification DescriptionOff The normal printer behavior for all supplies occurs.E‑mail Only The printer generates an e‑mail when the supply condition is reached. The status of thesupply appears on the menus page and status page.Warning The printer displays the warning message and generates an e‑mail about the status of thesupply. The printer does not stop when the supply condition is reached.Continuable Stop 1 The printer stops processing jobs when the supply condition is reached, and the user needsto press a button to continue printing.Non Continuable Stop 1,2 The printer stops processing jobs when the supply condition is reached. The supply must bereplaced to continue printing.1 The printer generates an e-mail about the status of the supply when supply notification is enabled.2 The printer stops when some supplies become empty to prevent damage.4 Click Submit.Restoring factory default settingsIf you want to keep a list of the current menu settings for reference, then print a menu settings page before restoringthe factory default settings. For more information, see “Printing a menu settings page” on page 55.If you want a more comprehensive method of restoring the printer factory default settings, then perform the Wipe AllSettings option. For more information, see “Erasing non‑volatile memory” on page 212.Warning—Potential Damage: Restoring factory defaults returns most printer settings to the original factory defaultsettings. Exceptions include the display language, custom sizes and messages, and network/port menu settings. Alldownloads stored in the RAM are deleted. Downloads stored in the flash memory or in a printer hard disk are notaffected.From the home screen, navigate to:> Settings > General Settings > Factory Defaults > Restore Now >Managing the printer 229
