Action Yes NoStep 2Replace the imaging unit, and then resend the print job.Does fog or shading appear on prints?Contact technicalsupport or your Dellprinter dealer.The problem is solved.Toner rubs offLeading edgeTrailing edgeABCD EFAction Yes NoStep 1From the Paper menu on the printer control panel, check the paper typeand weight.Do the paper type and texture match the paper loaded in the tray?Go to step 2. Specify the paper typeand weight from thetray settings to matchthe paper loaded in thetray.Step 2Check if you are printing on paper with texture or rough finishes.Are you printing on textured or rough paper?From the Paper menuon the printer controlpanel, set the papertexture.Contact technicalsupport or your Dellprinter dealer.Uneven print densityAction Yes NoReplace the imaging unit, and then resend the print job.Is the print density uneven?Contact technicalsupport.The problem is solved.Solving copy problems• “Copier does not respond” on page 296• “Scanner unit does not close” on page 296Troubleshooting 295
