Use ToContrast0–5Best for contentSpecify the contrast used for the copy job.Note: “Best for content” is the factory default setting.Mirror ImageOffOnCreate a mirror image of the original document.Note: Off is the factory default setting.Negative ImageOffOnCreate a negative image of the original document.Note: Off is the factory default setting.Shadow Detail‑4 to 4Adjust the amount of shadow detail visible on a copy.Note: 0 is the factory default setting.Fix Scan SkewAutoOffOnCorrect slight skew in the scanned image.Note: Off is the factory default setting.Scan edge to edgeOffOnSpecify if the original document is scanned edge‑to‑edge prior to faxing.Note: Off is the factory default setting.Sharpness1–5Adjust the amount of sharpness of a copy.Note: 3 is the factory default setting.Sample CopyOffOnCreate a sample copy of the original document.Note: Off is the factory default setting.Fax Settings menuFax Mode (Analog Fax Setup) menuAnalog Fax Setup mode sends the fax job through a telephone line.General Fax SettingsUse ToFax Name Specify the name of the fax in the printer.Fax Number Specify the number assigned to the fax.Fax IDFax NameFax NumberSpecify how the fax is identified.Understanding the printer menus 172
