Use ToResource SaveOnOffSpecify how the printer handles temporary downloads, such asfonts and macros stored in the RAM, when the printer receives ajob that requires more memory than is available.Notes:• Off is the factory default setting. This sets the printer toretain the downloads only until memory is needed.Downloads are deleted in order to process print jobs.• On retains the downloads during language changes andprinter resets. If the printer runs out of memory, thenMemory Full [38] appears, and downloads are notdeleted.Print All OrderAlphabeticalOldest FirstNewest FirstSpecify the order in which held and confidential jobs are printedwhen Print All is selected.Note: Alphabetical is the factory default setting. Print jobs alwaysappear in alphabetical order on the printer control panel.Finishing menuUse ToSides (Duplex)1 sided2 sidedSpecify whether two‑sided (duplex) printing is set as the default for all print jobs.Notes:• “1 sided” is the factory default setting.• You can set two‑sided printing from the printer software.For Windows users:Click File > Print, and then click Properties, Preferences, Options, or Setup.For Macintosh users:Choose File > Print, and then adjust the settings from the Print dialog and pop‑upmenus.Duplex BindingLong EdgeShort EdgeDefine the way duplexed pages are bound and printed in relation to page orientation.Notes:• Long Edge is the factory default setting. This assumes binding along the longedge of the page (left edge for portrait and top edge for landscape).• Short Edge assumes binding along the short edge of the page (top edge forportrait and left edge for landscape).Copies1–999Specify the default number of copies for each print job.Note: 1 is the factory default setting.Blank PagesDo Not PrintPrintSpecify whether blank pages are inserted in a print job.Note: Do Not Print is the factory default setting.Understanding the printer menus 194
