Print SettingsSetup menuUse ToPrinter LanguagePCL EmulationPS EmulationSet the printer language.Notes:• PCL Emulation is the factory default setting.• Setting a printer language as the default does not prevent asoftware program from sending print jobs that use anotherprinter language.Job WaitingOnOffSpecify that print jobs be removed from the print queue if theyrequire unavailable printer options or custom settings.Print jobs removed from the print queue are stored in a separateprint queue, so other jobs print normally. When the missinginformation or options are obtained, the stored jobs print.Notes:• Off is the factory default setting.• This menu setting appears only when a formatted, workingprinter hard disk is installed. This requirement ensures thatstored jobs are not deleted if the printer loses power.Print AreaNormalWhole PageSet the logical and physical printable area.Notes:• Normal is the factory default setting. When attempting toprint data in the non‑printable area defined by the Normalsetting, the printer clips the image at the boundary.• Whole Page allows the image to be moved into thenon‑printable area defined by the Normal setting, but theprinter will clip the image at the Normal setting boundary.This affects only pages printed using a PCL 5e interpreter.This has no effect on pages printed using the PCL XL orPostScript interpreter.Download TargetRAMFlashDiskSet the storage location for downloads.Notes:• RAM is the factory default setting. Storing downloads in theRAM is temporary.• Storing downloads in flash memory or on a printer hard diskplaces them in permanent storage. Downloads remain inflash memory or on the printer hard disk even when theprinter is turned off.• This menu setting appears only when a formatted, workingflash drive or printer hard disk is installed.Understanding the printer menus 193
