Action Yes NoStep 4Make sure that the paper has no texture or rough finishes.Are you printing on textured or rough paper?From the printercontrol panel, changethe texture settings inthe Paper Texturemenu to match thepaper you are printingon.Go to step 5.Step 5a Load paper from a fresh package.Note: Paper absorbs moisture due to high humidity. Store paper inits original wrapper until you use it.b Resend the print job.Is the print still too light?Go to step 6. The problem is solved.Step 6a Redistribute the toner in the imaging unit.1 Remove the toner cartridge, and then the imaging unit.2 Firmly shake the imaging unit.Warning—Potential Damage: Do not expose the imaging unit todirect light for more than 10 minutes. Extended exposure tolight may cause print quality problems.3 Install the imaging unit, and then the cartridge.b Resend the print job.Is the print still too light?Go to step 7. The problem is solved.Step 7Replace the imaging unit, and then resend the print job.Is the print still too light?Contact technicalsupport.The problem is solved.Skewed print) )ABCDEABCDEABCDETroubleshooting 288
