Revision December, 2014 4-1Chapter 4 Panel Display andOperationThis chapter details the panel status and operation of ADSA-A2R series servo drive.4.1 Panel DescriptionName FunctionDisplay Five-/Seven-segment display is for displaying the monitoring values,parameter values and setting values.SHIFT KeyPressing SHIFT key can scrolls through parameter groups. After aparameter is selected and its value displayed, pressing SHIFT key canmove the cursor to the left and then change parameter settings by usingarrow keys.SET KeyPressing the SET key can display and save the parameter groups, thevarious parameter settings. In monitor mode, pressing SET key canswitch decimal or hexadecimal display. In parameter mode, pressing SETkey can enter into parameter setting mode.DOWN Key Pressing the DOWN key can scroll through and change monitor codes,parameter groups and various parameter settings.MODE Key Pressing MODE key can enter or exit different parameter groups, andswitch between Monitor mode and Parameter mode.UP Key Pressing the UP key can scroll through and change monitor codes,parameter groups and various parameter settings.Charge LED The Charge LED lights to indicate the power is applied to the circuit.
