Chapter 2 InstallationASDA-A2R Series2-2 Revision December, 20142.3 Ambient Conditions of InstallationThe best temperature of this servo drive is between 0 ℃ and 55 ℃. If the temperature isover 45 ℃, please place the product in a well-ventilated environment so as to ensure itsreliability performance. If the product is installed in an electric box, make sure the size ofthe electric box and its ventilation condition will not overheat and endanger the internalelectronic device. Also, pay attention to the vibration of the machine. Check if the vibrationwill influence the electronic device of the electric box. Besides, the ambient conditionsshould also include: Location has no over-heat device. Location has no water drop, vapor, dust and oily dust. Location has no corrosive and inflammable gas and liquid. Location has no airborne dust and metal particles. Location has solid foundation and no vibration. Location has no interference of electromagnetic noise.The ambient temperature of the motor is between 0℃ and 40℃ and the ambient conditionsinclude: Location has no over-heat device. Location has not water drop, vapor, dust and oily dust. Location has no corrosive and inflammable gas and liquid. Location has no airborne dust and metal particles.
