Chapter 4 Panel Display and Operation ASDA-A2R Series4-12 Revision December, 20144.4.4 Digital Input Diagnosis OperationEnter into the Digital Input Diagnosis Mode by the following setting methods. When theexternal output signal DI1~DI8 is ON, the corresponding signal will be shown on thepanel. It is displayed by bit. When it shows bit, it means it is ON.For example, if it shows 3FE1, E is in hexadecimal format, it will be 1100 when it transfersto binary format. Then, DI6~DI8 is ON.SETDI14DI13DI12DI11DI10DI9DI8DI7DI6DI5DI4DI3DI2DI1CorrespondingDI statusBinary codeThe panel displays inhexadecimal format.(Display in hexadecimal format)4.4.5 Digital Output Diagnosis OperationEnter into the Digital Output Diagnosis Mode by the following setting methods. Theoutput signal DO1~DO5 is ON and the corresponding signal will be shown on the panel.It is displayed by bit. When it shows bit, it means it is ON.For example, if it shows 1F, F is in hexadecimal format, it will be 1111 when it transfers tobinary format. Then, DO1~DO4 is ON.SETDO5DO4DO3DO2DO1CorrespondingDO statusBinary codeThe panel displays inhexadecimal format(Display in hexadecimal format)
