Eaton Power Xpert Gateway 200E User & Installation Manual

Contents

CHAPTER 8 - PXG200E CONFIGURATION WEB PAGE95EATON PXG200E User Manual • IM02603001E Rev 5, 11-May-2012 • Firmware Version 5.03:3835Manually Enter IPv6 AddressThe primary usage for IPv6 communication is “local only,” meaning that thegateway functions as a stand-alone entity and the user monitors data viaPXG200E web pages.NOTICE: An IPv6 link-local address is automatically configured anddisplayed (Figure 94, A). It cannot be edited by the user.NOTICE: The PXG200E supports IPv6 stateless auto-configuration,which is enabled by default. The address and prefix lengthdetermined by stateless auto-configuration is displayed only if therouter provides them. It cannot be edited by the user.NOTICE: DHCPv6 is not be supported by the PXG200E.1. Enter the Static IP Address (Figure 94, B).NOTICE: Changing the static IP address will disconnect yourbrowser if you are configuring through the Ethernet LAN porton the PXG200E.2. Enter the Gateway (if any) (Figure 94, C).Figure 943. You can SAVE ALL SETTINGS, VIEW CHANGES or DISCARD CHANGESthat you have made. For details on how to use these functions, seeCommon PXG200E Configuration Functions on page 35.PXG200E_264A BC