CHAPTER 10 - PXG200E WEB PAGESEATON PXG200E User Manual • IM02603001E Rev 5, 11-May-2012 • Firmware Version 5.03:3835136Trend ViewingThe PXG200E allows the user to view real-time trend graphs for individualparameters for supported devices. The user can select to enable trending onthe Device Configuration page. Trending is enabled by default when addinga new device. Once trending is enabled, an icon will be displayed next to thetrended parameters on the Device page. Clicking on the icon will take you tothe trend graph for that particular parameter. There is an option to view thepast 2 hours, 24 hours, 7 days, 30 days or All Data when you access theTrend Graph page. It should be noted that if this option is not selected for agiven device, the data will not be available to graph and it will not bepublished to Power Xpert Software and it will not be populated in the datalog. The list of devices that support this feature can be found on thePXG200E device data map. Please refer to the device data map atwww.eaton.com/pxg.Procedure to View a Trend GraphUse the following procedure to view a trend log.1. On a Bus device page, click on the trend symbol (Figure 151, A).Figure 151NOTICE: The trend graph will take several seconds to loaddepending upon the number of items in the trend database and thenumber of points trended for each device. While the data is beingcompiled, an screen similar to (Figure 152, A) will be displayed.Figure 152PXG200E_130APXG200E_131Uploading trend data.....A
