Eaton Power Xpert Gateway 200E User & Installation Manual

Contents

CHAPTER 8 - PXG200E CONFIGURATION WEB PAGE61EATON PXG200E User Manual • IM02603001E Rev 5, 11-May-2012 • Firmware Version 5.03:3835Adding Additional Devices to an Existing Bus- Step-By-StepThis section explains how to add devices downstream of an existing bus.Recall that the purpose of each device is to monitor certain conditions ofyour electrical power system. To make the explanation of how to add thesedevices clearer, we have broken the devices into these categories:• Devices that connect directly to the PXG200E via COM1 or INCOM(except pulse counters) (See “Devices That Connect Directly toPXG200E” on page 62.)• Devices that connect to the PXG200E via a submaster that in turn isconnected to INCOM (See “Procedure for Submaster” on page 67.)• IQMESII Meter points (See “Procedure for IQMESII Meter Point” onpage 73.)• Pulse counters (See “Procedure for Pulse Counter” on page 79.)