Eaton XN300 Manual

Also see for XN300: Instruction manual Manual

27 Analog input/output module XN-322-4AIO-I27.1 Status LED signals204 XN300 slice modules 06/16 MN050002 EN www.eaton.com27.1 Status LED signalsFigure 110: LED signals and pin assignmenta Module status LEDb User status LEDc Cable break LED indicator for analog input 1d Cable break LED indicator for analog input 2e Supply voltage status LEDModule status green ON System OKOFF No powerFLASHES (5 Hz) No communicationStatus User yellow ON The user can set the LED signals as necessary.(For example, the visualization interface can be used to setthe module's LED to flash so that it is easier to find themodule inside the control panel.)OFFFLASH(200 ms ON,1000 ms OFF)FLASH(1000 ms ON,200 ms OFF)Analog inputstatusred ON Minimum current (4 mA) fallen below / cable breakFLASH (2 Hz) Maximum current exceededPower supplystatusgreen ON Supply voltage for analog inputs and outputs OKOFF Supply voltage for inputs and outputs faultyX14AIOISUX2X31+1-2+2-1+-2+-24V24V0V0V③①④⑤②