Eaton XN300 Manual

Also see for XN300: Instruction manual Manual

29 Analog weigh module XN-322-2DMS-WM29.8 Memory layout232 XN300 slice modules 06/16 MN050002 EN www.eaton.com29.8 Memory layoutCANObjectIndexSize(byte)Description Bit0x3060 2 Modules Diagnostics(Error bits 7 and 8 will be set to "zero"the moment the set gain matches thestored values. The application mustensure that the correct GAIN (andfilter type and filter depth) is set. Ifthe gain changes, the calibrationmust be repeated.)Bit 0 reservedBit 1 no SYNC signalBit 2 FLASH-CRC errorBit 3 RAM-CRC errorBit 4 FLASH memory errorBit 5 Bridge 1 DC not OKBit 6 Bridge 2 DC not OKBit 7 Offset ADC 1 invalidBit 8 Offset ADC 2 invalidBit 9 Filter ADC 1 not readyBit 10 Filter ADC 2 not readyBit 11…15 reserved0x3061 4 Measured value 1 (AI1)Current value of channel (ifAI1ConfigValid and the Ready bit inAI1ADCState are set)Measured value 1 (AI1) DWORD0x3062 4 Measured value 2 (AI2)Current value of channel (ifAI2ConfigValid and the Ready bit inAI2ADCState are set)Measured value 2 (AI2) DWORD0x3063 2 Diagnostic ADC Controller Byte 0 ADC AI1Bit 0…4 reservedBit 5 Faulty reference voltageBit 6 ADC measuring range errorBit 7 Conversion in progress1 Byte ADC AI2Bit 0…4 reservedBit 5 Faulty reference voltageBit 6 ADC measuring range errorBit 7 Conversion in progress