S8 RTD Temperature 469Motor Management RelaySetpointshttp://www.GEindustrial.com/multilin 5–61GE MultilinRTD 11 PATH: SETPOINTS ZV S8 RTD TEMPERATURE ZV RTD #11RTD 11 defaults to “Other” RTD type. The Other selection allows the RTD to be usedto monitor any temperature that might be required, either for a process oradditional bearings or other. There are individual alarm, high alarm and tripconfigurations for this RTD. Trip voting has been added for extra reliability in theevent of RTD malfunction. If enabled, a second RTD must also exceed the triptemperature of the RTD being checked before a trip will be issued. If the RTD ischosen to vote with itself, the voting feature is disabled. The RTD name may bechanged if desired. RTD #11 [Z] RTD #11 APPLICATION:OtherRange: Stator, Bearing, Ambient, Other,NoneMESSAGE RTD #11 NAME: Range: 8 alphanumeric charactersMESSAGE RTD #11 ALARM:OffRange: Off, Latched, UnlatchedMESSAGE ASSIGN ALARM RELAYS:AlarmRange: Alarm, Alarm & Auxiliary2,Alarm & Aux2 & Aux3, Alarm &Auxiliary3, Auxiliary2, Aux2 &Aux3, Auxiliary3MESSAGE RTD #11 ALARMTEMPERATURE: 80°CRange: 1 to 250°C in steps of 1MESSAGE RTD #7 HIGH ALARM:OffRange: Off, Latched, UnlatchedMESSAGE HIGH ALARM RELAYS:AlarmRange: Alarm, Alarm & Auxiliary2,Alarm & Aux2 & Aux3, Alarm &Auxiliary3, Auxiliary2, Aux2 &Aux3, Auxiliary3MESSAGE RTD #11 HIGH ALARMTEMPERATURE: 80°CRange: 1 to 250°C in steps of 1MESSAGE RTD #11 ALARMEVENTS: OffRange: On, OffMESSAGE RTD #11 TRIP:OffRange: Off, Latched, UnlatchedMESSAGE RTD #11 TRIP VOTING:RTD #11Range: RTD #1 to RTD #12MESSAGE ASSIGN TRIP RELAYS:TripRange: Trip, Trip & Auxiliary2, Trip &Aux2 & Aux3, Trip & Auxiliary3MESSAGE RTD #11 TRIPTEMPERATURE: 90°CRange: 1 to 250°C in steps of 1
