Operation Manual – QoSH3C S7500E Series Ethernet Switches Chapter 3 QoS Policy Configuration3-6To do… Use the command… RemarksRemark IP precedence forpacketsremark ip-precedenceip-precedence-valueRemark local precedencefor packetsremark local-precedencelocal-precedenceRemark the serviceprovider network VLAN IDfor packetsremark service-vlan-idvlan-id-valueII. Configuration example1) Network requirementsCreate a traffic behavior named test, configuring TP action for it, with the CAR being640 kbps.2) Configuration procedure# Enter system view. system-view# Create the traffic behavior (This operation leads you to traffic behavior view).[Sysname] traffic behavior test# Configure TP action for the traffic behavior.[Sysname-behavior-test] car cir 6403.2.4 Defining a PolicyA policy associates a class with a traffic behavior. Each traffic behavior is comprised ofa group of QoS actions. A device executes these QoS actions in the order they aredefined.Follow these steps to associate a traffic behavior with a class:To do… Use the command… RemarksEnter system view system-view —Create a policy (This operationleads you to policy view) qos policy policy-name —Specify the traffic behavior fora classclassifier classifier-namebehavior behavior-name Required
